Loading ...
Loading ...
Loading ...
SSC has three states:
1. Off (feature is not enabled and will not activate)
2. Enabled (feature is enabled and ready but activation
conditions are not met, or driver is actively overrid-
ing with brake or throttle application)
3. Active (feature is enabled and actively controlling
vehicle speed)
Enabling SSC
SSC is enabled by pushing the SSC switch, but the fol-
lowing conditions must also be met to enable SSC:
•
The driveline is in 4WD Low.
•
The vehicle speed is below 5 mph (8 km/h).
•
The parking brake is released.
•
The driver seat belt is buckled.
•
The driver is not applying throttle.
•
The driver door is closed (If doors are attached, the
door must be closed. If doors are detached, then
driver seat belt must be buckled).
Activating SSC
Once SSC is enabled it will activate automatically once
the following conditions are met:
•
The driver releases the throttle.
•
The driver releases the brake.
•
The transmission is in any selection other than
PARK.
•
Your vehicle speed is below 20 mph (32 km/h).
•
The driver door is closed (If doors are attached, the
door must be closed. If doors are detached, then
driver seat belt must be buckled).
The set speed for SSC is selectable by the driver, and
can be adjusted by using the gear shift +/-. Additionally,
the SSC set speed may be reduced when climbing a
grade and the level of set speed reduction depends on
the magnitude of grade. The following summarizes the
SSC set speeds:
SSC Target Set Speeds
•
1st=0.6mph(1km/h)
•
2nd=1.2mph(2km/h)
•
3rd=1.8mph(3km/h)
•
4th=2.5mph(4km/h)
•
5th=3.1mph(5km/h)
•
6th=3.7mph(6km/h)
•
7th=4.3mph(7km/h)
•
8th=5mph(8km/h)
•
9th = 5.6 mph (9 km/h) — if equipped
•
REVERSE = 0.6 mph (1 km/h)
•
NEUTRAL = 1.2 mph (2 km/h)
•
PARK = SSC remains enabled but not active
SSC Target Set Speeds — If Equipped With Off Road+
•
1st=0.6mph(1km/h)
•
2nd=0.9mph(1.5km/h)
•
3rd=1.2mph(2km/h)
•
4th = 1.5 mph (2.5 km/h)
•
5th=1.8mph(3km/h)
•
6th=2.5mph(4km/h)
•
7th=3.7mph(6km/h)
•
8th=5mph(8km/h)
•
REVERSE = 0.6 mph (1 km/h)
•
NEUTRAL = 1.2 mph (2 km/h)
•
PARK = SSC remains enabled but not active
NOTE:
•
During SSC, the +/- gear selector input is used for
SSC target speed selection but will not affect the
gear chosen by the transmission. While actively con-
trolling SSC, the transmission will shift appropriately
for the driver-selected set speed and corresponding
driving conditions.
•
SSC operation is influenced by Off Road+ drive
mode if active. The differences may be notable to
the driver as a varying level of aggressiveness.
Driver Override
The driver may override SSC activation with throttle or
brake application at any time.
Deactivating SSC
SSC will be deactivated but remain available if any of
the following conditions occur:
•
The driver overrides SSC set speed with throttle or
brake application.
•
The vehicle speed exceeds 20 mph (32 km/h) but
remains below 40 mph (64 km/h).
•
The vehicle is shifted into PARK.
Disabling SSC
SSC will deactivate and be disabled if any of the follow-
ing conditions occur:
•
The driver pushes the SSC switch.
•
The driveline is shifted out of the 4WD Low.
•
The parking brake is applied.
•
The vehicle is driven greater than 20 mph
(32 km/h) for greater than 70 seconds.
•
The vehicle is driven greater than 40 mph
(64 km/h). SSC will exist immediately.
•
The driver door opens (Driver door opens if doors
are attached or driver seat belt is unbuckled if doors
are detached).
190 SAFETY
Loading ...
Loading ...
Loading ...