Loading ...
Loading ...
Loading ...
NOTE:
Shifting into or out of 4L is possible with the vehicle
completely stopped; however, difficulty may occur due
to the mating teeth not being properly aligned. Several
attempts may be required for clutch teeth alignment
and shift completion to occur. The preferred method is
with the vehicle rolling at 1 to 3 mph (2 to 5 km/h).
Avoid attempting to engage or disengage 4L with the
vehicle moving faster than 1 to 3 mph (2 to 5 km/h).
During cold weather, you may experience increased
effort in shifting until the transfer case fluid warms up.
This is normal.
WARNING!
Failure to engage a transfer case position completely
can cause transfer case damage or loss of power and
vehicle control. You could have a collision. Do not
drive the vehicle unless the transfer case is fully
engaged.
FIVE-POSITION TRANSFER CASE —
IF EQUIPPED
The transfer case provides five positions:
•
2H (Two-Wheel Drive High Range)
•
4H AUTO (Four-Wheel Drive Auto High Range)
•
4H PART TIME (Four-Wheel Drive Part Time High
Range)
•
N (Neutral)
•
4L (Four-Wheel Drive Low Range)
For additional information on the appropriate use of
each transfer case position, see the following
information:
2H
Two-Wheel Drive High Range — This range is for normal
street and highway driving on dry, hard surfaced roads.
4H AUTO
Four-Wheel Drive Auto High Range — This range sends
power to the front wheels. The four-wheel drive system
will be automatically engaged when the vehicle senses
a loss of traction. This range provides additional trac-
tion for varying road conditions.
4H PART TIME
Four-Wheel Drive Part Time High Range — This range
maximizes torque to the front driveshaft, forcing the
front and rear wheels to rotate at the same speed. This
range provides additional traction for loose, slippery
road surfaces only.
N (Neutral)
WARNING!
You or others could be injured or killed if you leave
the vehicle unattended with the transfer case in the N
(Neutral) position without first fully engaging the park-
ing brake. The transfer case N (Neutral) position dis-
engages both the front and rear driveshafts from the
powertrain, and will allow the vehicle to roll, even if
the automatic transmission is in PARK (or manual
transmission is in gear). The parking brake should
always be applied when the driver is not in the
vehicle.
Neutral — This range disengages both the front and
rear driveshafts from the powertrain. To be used for flat
towing behind another vehicle
page 158.
4L
Four-Wheel Drive Low Range — This range provides low
speed four-wheel drive. It maximizes torque to the front
driveshaft, forcing the front and rear wheels to rotate at
the same speed. This range provides additional traction
and maximum pulling power for loose, slippery road
surfaces only. Do not exceed 25 mph (40 km/h).
This transfer case is designed to be driven in the two-
wheel drive position (2H) or four-wheel drive position
(4H AUTO) for normal street and highway conditions on
dry hard surfaced roads.
For variable driving conditions, the 4H AUTO mode can
be used. In this mode, the front axle is engaged, but the
vehicle's power is sent to the rear wheels. Four-wheel
drive will be automatically engaged when the vehicle
senses a loss of traction. Because the front axle is
engaged, this mode will result in lower fuel economy
than the 2H mode.
Four-Wheel Drive Gear Selector
STARTING AND OPERATING 127
4
Loading ...
Loading ...
Loading ...