Loading ...
Loading ...
Loading ...
•
Engine has not reached normal operating
temperature
•
Engine or exhaust temperature is too high
•
The transmission is not in a forward gear
•
Hood is open
•
Transfer case is in 4L or N (Neutral)
•
Brake pedal is not pressed with sufficient pressure
•
Accelerator pedal input
•
Vehicle speed threshold has not been achieved from
previous Autostop
•
Steering angle is beyond threshold
•
ACC is on and speed is set
•
Vehicle is at high altitude
•
System fault is present
It may be possible for the vehicle to be driven several
times without the Stop/Start system going into a STOP/
START READY state under more extreme conditions of
the items listed previously.
TO START THE ENGINE WHILE IN
AUTOSTOP MODE
While in a forward gear, the engine will start when the
brake pedal is released or the throttle pedal is pressed.
The transmission will automatically re-engage upon
engine restart.
Conditions That Will Cause The Engine To Start Auto-
matically While In Autostop Mode:
•
The transmission selector is moved out of DRIVE
•
To maintain cabin temperature comfort
•
Actual cabin temperature is significantly different
than temperature set on Auto HVAC
•
HVAC is set to full defrost mode
•
HVAC system temperature or fan speed is manually
adjusted
•
Battery voltage drops too low
•
Stop/Start OFF switch is pushed
•
A Stop/Start system error occurs
•
Stop/Start Autostop Active time exceeds five
minutes
•
Transfer case is in 4L or N (Neutral)
•
Steering wheel is turned beyond threshold
TO MANUALLY TURN OFF THE
STOP/START SYSTEM
Push the Stop/Start OFF switch (located on the switch
bank). The light on the switch will illuminate. The “Stop/
Start OFF” message will appear in instrument cluster
display within the Stop/Start section, and the autostop
function will be disabled
page 100.
NOTE:
The Stop/Start system will reset itself back to an ON con-
dition every time the ignition is turned off and back on.
TO MANUALLY TURN ON THE
STOP/START SYSTEM
Push the Stop/Start Off switch (located on the switch
bank). The light on the switch will turn off.
SYSTEM MALFUNCTION
If there is a malfunction in the Stop/Start system, the
system will not shut down the engine. A “SERVICE
STOP/START SYSTEM” message and a yellow Stop/
Start telltale will appear in the instrument cluster dis-
play
page 100.
If the “SERVICE STOP/START SYSTEM” message
appears in the instrument cluster display, have the sys-
tem checked by an authorized dealer.
CRUISE CONTROL SYSTEMS —
IF EQUIPPED
Your vehicle may be equipped with the Cruise Control
system, or the Adaptive Cruise Control (ACC) system:
•
Cruise Control will keep your vehicle at a constant
preset speed.
•
Adaptive Cruise Control (ACC) will adjust the vehicle
speed up to the preset speed to maintain a distance
with the vehicle ahead.
NOTE:
•
In vehicles equipped with ACC, if ACC is not enabled,
Fixed Speed Cruise Control will not detect vehicles
directly ahead of you. Always be aware of the fea-
ture selected.
•
Only one Cruise Control feature can operate at a
time. For example, if Fixed Speed Cruise Control is
enabled, Adaptive Cruise Control will be unavailable,
and vice versa.
Stop/Start OFF Switch
STARTING AND OPERATING 135
4
Loading ...
Loading ...
Loading ...