AcuRite 01094M Temperature & Humidity Station with 3 Indoor/Outdoor Sensors

User Manual - Page 8

For 01094M.

PDF File Manual, 14 pages, Read Online | Download pdf file

01094M photo
Loading ...
Loading ...
Loading ...
Tull
Troubleshooting
Problem Possible Solution
No reception
no bars
If the wireless signal indicator shows no bars:
Relocate the display and/or wireless sensor. The
products must be within 330 ft (100 m) of each other.
Make sure products (display and Sensors) are placed
at least 3 feet (.9 m) away from electronics that may
interfere with the wireless communication (such as
TVs, microwaves, computers, etc).
Use standard alkaline batteries (or lithium batteries
in Sensors when temperature is below -4ºF/-20ºC).
Do not use heavy duty or rechargeable batteries.
Note: It may take a few minutes for the display and
sensor(s) to synchronized after batteries are replaced.
Display screen
not working
Check that the batteries are installed correctly.
Batteries may need to be replaced.
Sensor not recognized /
blank sensor data
If the Home Environment Display is being used with
more than one Temperature & Humidity Sensor (models
06002 or 06044), the A-B-C channels must differ
between each sensor.
1. Bring the display and wireless sensors together and
position them side-by-side.
2. Remove the batteries from the display.
3. Verify that each sensor has a different A-B-C
channel selected.
Model 06002 - Locate the A-B-C switch inside the
battery compartment to adjust channel setting.
Model 06044 - Locate the A-B-C button on the back
of the sensor to adjust channel setting (indicated on
sensor display).
4. Re-install sensor batteries (if applicable).
5. Re-install display batteries.
Note: It may take a few minutes for the display and
sensor(s) to synchronized after batteries are replaced.
Inaccurate
temperature
or humidity
Verify the product that is reporting an inaccurate
temperature reading is placed out of direct sunlight and
away from any heat sources or vents (see page 6).
• Verify the product that is reporting an inaccurate
humidity reading is positioned away from moisture
sources (see page 6).
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
8
Loading ...
Loading ...
Loading ...