Loading ...
2
TABLE OF CONTENTS
FEATURES ....................................................................2
IMPORTANT SAFETY INSTRUCTIONS .........................4
SAFETY GUIDELINES - DEFINITIONS .........................4
GENERAL SAFETY RULES .............................................5
PLANER SAFETY RULES ...............................................6
PROPOSITION 65 WARNING ......................................6
POWER CONNECTIONS ...............................................7
POWER SOURCE ............................................................7
GROUNDING INSTRUCTIONS .........................................7
ELECTRICAL CONNECTION ..............................................7
POLARIZED PLUGS .........................................................7
EXTENSION CORDS ........................................................7
UNPACKING ................................................................8
UNPACKING AND CLEANING ............................................8
PACKAGE CONTENTS .....................................................8
ASSEMBLY ...................................................................9
ATTACHING THE CUTTERHEAD LOCK HANDLE ..................9
ATTACHING THE CUTTERHEAD HEIGHT ADJUSTING
HANDLE .........................................................................9
PREPARING FOR DUST MANAGEMENT ..........................10
FASTENING THE PLANER TO A SUPPORTING SURFACE ...11
OPERATION ...............................................................11
STARTING AND STOPPING THE PLANER ......................... 11
USING THE CUTTERHEAD LOCK ....................................12
ADJUSTING THE HEAD ASSEMBLY..................................12
USING THE MATERIAL REMOVAL GAUGE ........................ 12
RECOMMENDED DEPTH OF CUT ....................................13
USING THE DEPTH STOP ............................................... 13
USING THE ADJUSTABLE INDEXING RING ......................14
MINIMUM/MAXIMUM WIDTH/HEIGHT/DEPTH ................. 14
PROPER PLANING TECHNIQUES ....................................14
MAINTENANCE/ADJUSTMENTS .................................15
CHECKING, ADJUSTING, CLEANING AND REPLACING
KNIVES ........................................................................15
ADJUSTING THE IN-FEED AND OUT-FEED TABLES ..........17
CALIBRATING THE INDICATOR ARROW .......................... 18
WEAR TABLE AND IN-FEED/ OUT-FEED TABLE
MAINTENANCE .............................................................18
CIRCUIT BREAKER RESET BUTTON ................................18
BRUSH CHANGE ............................................................18
REPLACING THE DRIVE BELT ........................................ 18
KEEP MACHINE CLEAN ..................................................18
LUBRICATION ............................................................... 18
TROUBLESHOOTING .................................................19
FAILURE TO START .......................................................19
ACCESSORIES ...........................................................19
PARTS, SERVICE OR WARRANTY ASSISTANCE .........20
The DELTA
®
Model 22-590X is a 13 inch (330mm) Portable
Planer with a cutting capacity of 1/8 inch (3.2mm). This Planer
can be used on boards up to 13 inch wide (330mm) and 6 inch
thick (152mm). This machine has a powerful 15 amp 120 volt
motor with a three-knife cutterhead.
NOTE: You can make a 1/8 inch (3.2mm) depth-of-cut in soft
woods up to 6 inch (152mm) wide and in hard woods up to 4
inch (102mm) wide. For more information see “Recommended
Depth of Cut section” on page 13.
FEATURES
NOTICE: The cover illustration shows the current production
model configuration. All other illustrations contained in the
manual are representative ONLY and may not depict the
actual labeling or accessories included. These are intended to
illustrate technique ONLY.
MOTOR SPECIFICATIONS
Your machine is wired for 120 volt, 60 Hz alternating current.
Before connecting the machine to the power source, make sure
the switch is in the “OFF” position.
Supply Voltage: 120 V AC~
Current: 15 A
Frequency: 60 Hz
No Load RPM: 10,000/min
SPECIFICATIONS
Loading ...
Loading ...
Loading ...