Loading ...
Loading ...
Loading ...
Figure 4-8 Drill Installaon Hole
2.
Remove the
plasc sheet of the cable entry.
3.
Mark the gang box screw holes on the wall.
1) Route the cables through the gang box hole.
2) Insert the gang box into the
installaon hole.
3) Mark the gang box screw holes' posion with a marker, and take out the gang box.
Figure 4-9 Mark the Screw Holes
4.
Drill 4 holes according to marks on the wall, and insert the expansion sleeves into the screw
holes.
DS-KD8003 Series Module Door Staon User Manual
26
Loading ...
Loading ...
Loading ...