Hikvision DS-KD8003-IME1B/NS User Manual

Loading ...

Chapter 2 Congure Sub Module Address

You need to set the sub module address via DIP switch before installaon.

Steps

Remove the rubber cover on the rear panel of the sub module to expose the DIP switch.

Figure 2-1 DIP Switch

Set the sub module address according to the DIP rules, and install the rubber cover back.

Note

●

DIP 1, 2, 3, 4 are used to coding the sub module address. DIP 5, 6, 7, 8 are reserved.

●

Valid sub module address is from 1 to 8. The address should be unique for connecng to the

main unit.

The sub module address and its corresponding switch status are displayed as below.

Sub

Module

Address

DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 DIP 8

Module 1 ON OFF OFF OFF OFF OFF OFF OFF

Module 2 OFF ON OFF OFF OFF OFF OFF OFF

Module 3 ON ON OFF OFF OFF OFF OFF OFF

Module 4 OFF OFF ON OFF OFF OFF OFF OFF

Module 5 ON OFF ON OFF OFF OFF OFF OFF

DS-KD8003 Series Module Door Staon User Manual

Loading ...

Hikvision DS-KD8003-IME1B/NS KD8 Series Pro Modular Door Station