Loading ...
Loading ...
Loading ...
66
3.7.2.5 P2P
You can watch remote NVR live view in WAN by P2P on M-Sight Pro without doing port forwarding on
router.
Click “Enable” and “Save” to enable P2P.
P2P is enabled successfully when P2P Status shows “Activated”.
After enabling, you can add the NVR on the APP M-Sight Pro for live view via scanning the QR code on
the “P2P” page directly, or inputting the MAC address manually.
There are several status shows on P2P Status after clicking Saving, please check corresponded
possibilities below:
P2P Status Description
Network unavailable Failed to connect with internet
Authentication request failed Failed to authenticate P2P encryption
No idle UUID Please contact Milesight if this status shows up
Activated P2P is available
Login failed Failed to login P2P server
Initialization failed Failed to initialize P2P
Unactivated P2P is disabled
Unknown error Other error
Note:
1. Please make sure that NVR is available for internet before enabling.
2. If your NVR firmware version is not 7x.7.0.9-r2 or above, please contact Milesight to registered
P2P first.
Loading ...
Loading ...
Loading ...