Loading ...
Loading ...
Loading ...
125
4.5.5.4 User
Note:
1. If the NVR firmware version out of the factory is xx.7.0.6 or above, the default user name
is “admin” and the default password is “ms1234”;
2. If the NVR firmware is upgraded to xx.7.0.6 or above from a lower version, the default
password will turn to “ms1234” after a reset, or it will keep the old default password
“123456”;
3. If the NVR firmware version is below xx.7.0.6, the default user name is “admin” and the
default password is “123456”.
Add a new user
Click [Add] to enter the user add menu, input information for the new user, select user level and set
user privileges, then click to save settings.
Note: User name can only contain letters and number. There are two user levels with different
authority: Operator and Viewer.
Loading ...
Loading ...
Loading ...