Loading ...
Loading ...
Loading ...
Page 6 • JL Audio, Inc., 2020 Continued on Next Page
STEP 24
Enlarge the forward hole using a 1/4” drill bit.
STEP 23
Using a 1/16” drill bit, carefully drill through
each of the three marks on Template A and into
the hull.
Carefully remove Template A from the vessel.
STEP 22
Carefully cut Template A from the clear sheet
on the indicated line.
Align Template A with the bottom of the
induction box on the port side, and tape it into
position.
STEP 21
Carefully remove the console from the vessel
by guiding the handle bar and throttle control
through the center opening.
STEP 20
From under the console, unplug the main
harness and the Menu Scroll / Alarm Mute
switch.
STEP 19
Remove the four handle bar bolts, and carefully
set the handle bar to the side.
STEP 18
Remove the throttle control from the handle
bar and carefully set it to the side.
STEP 17
Remove the four screws from the throttle
control.
SLPK-YA-19FXC / SLPK-YA-19FXC-SUB INSTR_SKU# 011531
Loading ...
Loading ...
Loading ...