Loading ...
Loading ...
Loading ...
APPENDIX
• When the battery level is low, recharge
it. If the level of the battery remains low
for a long period of time, it can cause the
performance of the battery to degrade.
• Clean the multi-use wet pad of the wet
brush gently with hands by using a washing
soap.
• If the wet pad is exposed to heat or
softener, it may be modied and product
performance can be degraded.
• The multi-use wet pad can be cleaned using
a washing machine. However, if it is boiled,
the pad may be modied or discolored and
product performance can be degraded.
• Use a genuine wet pad of Samsung
Electronics for wet brush.
• If the wet brush is used without a wet
pad, any product malfunction will not be
covered by warranty and a service fee will
be charged.
• When you purchase an additional multi-
use wet pad for the wet brush, contact a
Samsung service center.
• When you purchase an additional single-use
wet pad, check the model name VCA-SPA90.
CAUTION
• When the spinning brush (drum) inside a
brush is working, do not touch the brush.
– Otherwise, your hand can be caught and it
may cause an injury.
• Before using the wet brush, detach the wet
pad and put some water on it, then reattach
it to the spin disk.
• Do not use the vacuum cleaner on items that
can be scratched (TV and monitor screens,
etc.)
Maintenance
NOTE
• Sometimes the wheel of a brush can scratch
the oor. Before using the vacuum cleaner,
check the status of the wheels of the brush.
– If there is foreign matter on the wheel of
the brush which cannot be removed easily,
contact a Samsung service center.
• If the inner part of the wet brush is clogged
with a large foreign matter, spinning speed
decreases or stops.
CAUTION
• Storing the vacuum cleaner in sunlight for
long hours may cause parts of the vacuum
to deform or discolor. Therefore, after
cleaning the parts of the vacuum cleaner,
dry them in the shade.
• Do not clean the brush of the vacuum
cleaner with water. Cleaning it with water
can cause the brush to deform or discolor.
• Before cleaning the wall mount, you must
unplug the wall mount.
• If you notice a continuous reduction in
suction or the vacuum cleaner overheats
abnormally, replace the ultra ne dust lter.
• After cleaning <a dustbin>, <a metal mesh
grille lter>, or <a washable micro lter>
with water, dry in the shade.
– When heat is applied, product
malformation may occur.
English
21
2023-05-04 오후 2:07:32
Loading ...
Loading ...
Loading ...