Loading ...
Loading ...
Loading ...
OPERATION
02
Spinning brush stuck: When a foreign
matter is clogged at the spinning brush
❇ If the overheating prevention device of
the motor works, the spinning brush stuck
display will not turn on.
03
No Filter: When the washable micro lter
is not assembled correctly
04
Suction power: Displays current suction
power.
05
Wet brush cleaning mode: When the wet
brush is assembled
❇ If the display above 01, 02, or 03 blinks a
few times and the vacuum cleaner stops
operation, please take action by referring
to the maintenance part of this manual.
Using the accessories
If the vacuum operates with the spinning
brush not working, check whether the brush
gets excessive force or clogged with a foreign
matter. (Please refer to the troubleshooting
part of this manual.)
#10
Disassembling the accessories
• When disassembling the pipe, press the
release button at the rear of the pipe.
• Before disassembling the accessories,
operate in MAX mode for more than
10seconds to remove foreign matter
remained in the accessories.
• When disassembling the brush, press the
release button at the rear of the brush.
#11
Soft Action Brush
Use to clean a oor (wood and linoleum).
#12
Turbo Action Brush
Use the Turbo Action Brush to clean various
oor conditions at home, it is also suitable to
clean carpet.
#13
Pet Tool
Use to clean bedding.
#14
Combination Tool
Use to remove dust from curtains, furniture,
sofas, etc.
#15
Extension Crevice Tool
Use to remove dust in grooves of window
frames, chinks, corners, etc.
#16
Flexible Tool
Use to clean the places hard to reach such as
upper or rear parts of furniture or ceilings.
NOTE
• The Flexible Tool can be connected to the
Combination Tool and Extension Crevice
Tool.
#17
Wet Brush
Use to clean a oor with a wet pad (wood and
linoleum).
❇ The Wet Brush does not have a dust suction
function.
❇ When attaching the wet pad, make sure the
pad is in the center of the spin disk.
Using the multi-use wet pad
01
Multi-use wet pad
02
Velcro
03
Spin disk
Attach the multi-use wet pad to the spin disk.
Using the single-use wet pad
04
Attachable pad
05
<Front> Velcro side
06
<Back>
07
Single-use wet pad
1) Attach the attachable pad to the spin disk
and 2) attach a single-use wet pad on top of
each of the attachable pads.
❇ When using the single-use wet pad, make
sure the direction of the attachable pad is
correct. Velcro side is the front side.
❇ After using the single-use wet pad, discard
the pad.
❇ If you use the single-use wet pad without
the attachable pad, cleaning performance
can be degraded.
English
13
2023-05-04 오후 2:07:29
Loading ...
Loading ...
Loading ...