Loading ...
Loading ...
Loading ...
OPERATION
Charging the battery
❇ When the battery level indicator is at its
lowest level and blinks(
) charge the
battery.
❇ When charging the vacuum, make sure
the connection part of the wall mount is
correctly connected.
❇ The vacuum cleaner cannot be used while it
is charging.
CAUTION
• Before ejecting the battery, the product
must be turned off. (If the battery is forcibly
ejected while the vacuum is operating, the
vacuum can malfunction.)
• Be careful not to drop the battery. If you
do, you can injure yourself or damage the
battery.
#3
Charging with a wall mount
• Make sure the back of the battery is
correctly placed onto the vacuum charging
part.
• Check if the battery level indicator is
displayed while charging.
• The battery level indicator blinks while
charging. When charging is complete, the
blinking stops and the light level dims.
#4
Charging with a desk charger
• Charge the battery at the desk charger.
• Push the battery in rmly.
• Check if the battery level indicator is
displayed while charging.
#5
Ejecting and re-inserting the battery
• Press the battery release button at the rear
of the handle to eject the battery.
• Push the battery to the end until you hear
it click.
Storing the accessories
#6
At the wall mount
• When accessories are disassembled to be
stored, dust may fall from the suction part
of the vacuum cleaner.
• After cleaning, operate in MAX mode for
10seconds.
#7
At the desk charger
• Place the desk charger on a desk after
folding the accessory holders and assemble
the accessories to the holders as shown in
the picture.
• If the Extension Crevice Tool is inserted rst,
the accessory holders can be folded more
easily.
Operating the vacuum cleaner
If the brush clings to oors (such as a carpet,
a mat, or bedding, etc.) or does not spin
properly, change the suction power to ‘MIN’
or ‘MID’ mode.
#8
🅐
Power ( ) on / off
When pressing the power button, the vacuum
cleaner starts operation in ‘MID’ mode.
• When the wet brush is assembled, operation
starts in ‘WET’ mode.
#8
Controlling suction power
You can control the suction power of the
vacuum cleaner.
• + button: Increases suction power.
• - button: Decreases suction power.
❇ The suction power control button does not
work in WET mode.
❇ ‘JET’ mode: Hold the [+] button down for
3sec. while in ‘MAX’ mode.
❇ The ‘JET’ mode is not displayed separately
on the screen.
#9
Checking the display
01
Clogged: When the dustbin, pipe, or
suction part is clogged
Operation
OPERATION
English
12
2023-05-04 오후 2:07:28
Loading ...
Loading ...
Loading ...