Loading ...
Loading ...
Loading ...
User’s Manual
22
Charging the Vehicle 4.2
Park the electric vehicle in place, power off the vehicle, and put the vehicle in braking status. Step 1
Charge the vehicle. You can charge the vehicle in 3 ways. Step 2
Free vending (plug & play): Connect the type 2 tethered cable of the EV Charger to the
charging port of the vehicle. The EV Charger starts charging the vehicle.
Connect EV Charger to the charging port of the vehicle Figure 4-18
RFID control: Swipe the RFID card on the RFID reader of the EV Charger to charge the
vehicle.
App control: Scan the app QR code in the device package, and then you can download
and install the app. Follow the instructions on the app to bind the EV Charger, and
confirm start charging the vehicle on the app.
Stopping Charging 4.3
Normally Stopping Charging
The EV Charger will automatically stop charging the vehicle when the electric vehicle is fully charged.
You can also stop charging the vehicle in one of the following 3 ways:
Press the stop charging button on the electric vehicle (only if the vehicle supports this function).
If the charging does not stop, try to unplug the charging connector directly.
If you start charging by swiping RFID card, swipe again to stop charging the vehicle.
If you start charging through the app, tap the stop icon on the app to stop charging.
After stopping charging, unplug the charging connector, and plug it in the socket of the EV Charger.
Abnormally Stopping Charging
Forced fault stop: A fault stop caused by the charger of the vehicle.
Automatic fault stop: A fault stop caused by the EV Charger.
If charging stops abnormally, refer to "5 Troubleshooting" for troubleshooting, or contact
maintenance service personnel.
Loading ...
Loading ...
Loading ...