User Manual - Page 108

For ACCORD SEDAN 2023.

Loading ...
Loading ...
Loading ...
106
uuIndicatorsu
Instrument Panel
IndicatorNameOn/BlinkingExplanation
Safety Support
Indicator (Amber)
Comes on if there is a problem with the
Road Departure Mitigation system,
CMBS
TM
, Low Speed Braking Control
*
, or
blind spot information system
*
.
Stays on constantly - Have your vehicle checked
by a dealer.
Comes on if there is a problem with the
parking sensor.
Check if the area around the sensor(s) is covered
with mud, ice, snow, etc. If the indicator stays on
even after you clean the area, have the system
checked by a dealer.
Indicator may come on temporarily when
the Maximum Load Limit is exceeded.
Make sure the total load is within the Maximum
Load Limit.
2 Maximum Load Limit P. 367
Stays on constantly - Have your vehicle checked
by a dealer.
Comes on if the Road Departure Mitigation
system, CMBS
TM
, and Low Speed Braking
Control
*
are deactivated temporarily after
the 12-volt battery has been disconnected
and then re-connected.
Drive a short distance at more than 12 mph (20
km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
Models with parking sensor system
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6010.book 106 ージ 022年12月12日 月曜日 午後3時19
Loading ...
Loading ...
Loading ...