Loading ...
Loading ...
Loading ...
26 27
4.
Attach Harness
Straps to Splitter
Plate.
Attach the loop at the
end of each harness strap
onto the splitter plate.
Positioning the Harness Strap
3.
Move harness strap.
Remove both harness straps from the slots and
feed them into the new slot, as shown.
Pull the harness strap to the back of the child
restraint.
Note: Straps must be positioned at the child’s
shoulder level or in the closest position slightly above.
IMPORTANT: When inserting harness straps through the
slots in the seat pad, make sure you route them correctly
through their corresponding slots in the seat shell.
IMPORTANT: Make sure
both harness straps are
installed completely on the
splitter plate, as shown.
Positioning the Crotch Strap
As your child grows, you will need to change the crotch
strap position so that it is in the slot closest to your child.
The crotch strap should ALWAYS be as close as possible
to, but NEVER under, the child’s bottom.
2.
Insert Crotch
Strap into new
slot.
Insert the crotch strap
anchor into the slot
that is the closest to
the child, but NEVER
under, the child’s
bottom.
Pull the crotch strap to
make sure it is secure.
1.
Remove Crotch
Strap.
Loosen the harness
straps and move them
out of the way.
Push the anchor up
through the slot to
the top of the seat
.
Using with the 5-pt Harness
Loading ...
Loading ...
Loading ...