Loading ...
Loading ...
Loading ...
18 19
5.
Connect and tighten
tether strap.
Connect the tether hook to the anchor behind the
vehicle seat, as shown. (Please consult your vehicle
owner’s manual, as tether anchor locations may vary.)
Pull the strap and tighten the tether securely.
Installation with Seat Belt
IMPORTANT: If you are using the vehicle seat belt to
secure the child restraint, DO NOT use the lower anchor
connector assembly.
1.
Disconnect tether
hook from the back
of the child restraint.
Tether Strap
2. Place the child
restraint in
position.
Set child restraint on
vehicle seat in forward-
facing position.
Lay the tether strap over
the back of the vehicle
seat.
3. Route vehicle seat
belt through belt
path
and buckle it,
as shown.
Vehicle Belt
Path
Using with the 5-pt Harness
The Tether Strap that comes with your child restraint
will be one of the two types below.
A
B
Tilt and slide the
adjuster
A
to loosen.
Press the adjuster release
button
B
to loosen.
Installation with lower anchor
connector assembly
Note: Lift the restraint’s seat pad away for easier access.
IMPORTANT: If your tether strap is too short to reach from
your child restraint to your vehicle tether anchor, you will need
a Tether Extender. Please call
ParentLink at 1-800-233-5921
(U.S.) or 1-937-773-3971 (Canada), or 01-800-706-12-00
(Mexico).
Loading ...
Loading ...
Loading ...