Loading ...
Loading ...
Loading ...
22 23
2.
Position harness
straps.
Unfasten chest clip and
place the child in the
child restraint.
B
ring each harness strap
over the child’s shoulders.
1. Loosen harness.
Press the harness release
button on the front of the
seat while pulling the
harness straps.
Securing the Child
IMPORTANT: The child’s back and bottom should be flat
against the restraint. If there is a gap, the child will not be
comfortable.
3. Buckle the harness.
Insert both buckle
tongues into the buckle.
Note: Pull up on the
harness straps to ensure
that the buckle tongues
are fastened securely.
Securing the Child
4. Fasten and adjust
chest clip.
Snap the two halves of
the chest clip together,
as shown, and slide to
armpit level.
5. Tighten harness.
Pull the harness adjuster strap to tighten the harness.
Note: Check the harness straps near the shoulders for
slack. You should NOT be able to pinch the harness
(see illustration). Adjust as needed.
IMPORTANT: A snug strap should not allow any slack.
It lies in a relatively straight line without sagging. It does
not press on the child’s flesh or push the child’s body into
an unnatural position.
Using with the 5-pt Harness
Loading ...
Loading ...
Loading ...