Snow Joe 24V-X4-SB21-CT 96-Volt MAX IONMAX Cordless Brushless Single-Stage Snow Blower 21-inch Tool Only

OPERATOR’S MANUAL - Page 9

For 24V-X4-SB21-CT.

PDF File Manual, 60 pages, Read Online | Download pdf file

24V-X4-SB21-CT photo
Loading ...
Loading ...
Loading ...
9
Charging a Hot or Cold Battery Pack
The green indicator lights on the charger base indicates that
the battery packs’ temperatures are outside the charging range.
Once the packs are within the acceptable range,
normal charging will take place and the red light will be
continuous. Hot or cold battery packs may take longer to
charge.
Operations
mWARNING! AVOID INJURY. Read and understand the
entire safety section before proceeding.
NOTE: Before inserting the batteries, verify that the snow
blower’s auger and rubber plates are firmly secured. Perform a
test run to ensure that the rotor turns freely.
Starting + Stopping
mWARNING! The auger starts rotating immediately after
the snow blower is switched on. Keep hands and feet away from
the auger.
1. Open the battery compartment cover and insert the four
batteries in until they click into place (Fig. 11). Close the
battery compartment cover.
Lithium-Ion Charging Status
Battery
Pack
Temperature
Charger
Base
Indicator
Light
Battery
Pack
Indicator
Light
Charging
Status
Too hot Green
Flashing
together
Not charging
Normal range Red
Flashing
one by one
Normal
charging
Too cold Green
Flashing
together
Not charging
In order to operate this cordless snow blower you will
need four batteries and a charger from the 24V iON+
System. See page 17 for battery and charger options and
specifications, or for more information visit snowjoe.com.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from the
outlet first, then disconnect the charger from the battery.
mWARNING! The chargers do not automatically turn
off when the battery is fully charged. Please take care not
to leave the battery plugged into the charger. Switch off or
unplug the charger at the mains when charging is complete.
5. Timely recharging of the battery will help prolong the
battery’s life. You must recharge the battery pack when you
notice a drop in the equipment’s power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Fig. 10
Battery
packs
Fully
Charged
green
Charging
red
24VCHRG-HS-DPC
dual-port charger
(Sold separately)
Loading ...
Loading ...
Loading ...