Loading ...
Loading ...
Loading ...
14 15
ninjakitchen.com
ninjakitchen.com
Dehydrate
1 Place cooking pot in the unit with the
indent on the pot aligned with the bump
on the main unit, then add a single layer
of ingredients to the bottom of the pot.
Place the crisper basket in the pot and
add a layer of ingredients to the bottom
of the basket. Close the hood.
2 Press the DEHYDRATE button. The
default temperature setting will display.
Use the up and down TEMP arrows to
set the desired temperature.
3 Use the up and down TIME arrows to
set the dehydration time, in 15-minute
increments, up to 12 hours.
4 Press START/STOP to begin. The unit
does not preheat in Dehydrate mode.
5 When dehydration time is complete, the
unit will beep and END will appear on
the display screen. Remove your food
and close the hood.
USING THE NINJA® FOODI™ PRO GRILL – CONT.
5 When preheating is complete, the unit
will beep and “Add Food” will flash
across on the display screen.
6 Open the hood and add ingredients to
the pot or set your bake pan directly
in the bottom of the pot, and close the
hood to start cooking. Once the hood is
closed, cooking will begin and the timer
will start counting down.
7 When cook time is complete, the unit
will beep and END will appear on the
display screen. If you need to add more
time to cook your food, simply press the
TIME up arrow and press START/STOP.
Bake
1 Place cooking pot in the unit with the
indent on the pot aligned with the bump
on the main unit, then close the hood.
2 Press the BAKE button. The default
temperature setting will display. Use
the up and down TEMP arrows to adjust
the temperature.
3 Use the up and down TIME arrows to set
the cook time, in 15-minute increments,
up to 4 hours, or follow the instructions
on page 9 to set a probe temperature
using TEMP iQ.
4 Press START/STOP to begin preheating.
PRE will appear on the display screen,
and the progress bar will begin. It can
take up to 3 minutes to preheat.
NOTE: During dehydration, you can
open the hood to check on your food.
The timer will pause when the hood is
opened and then automatically resume
after it is closed.
NOTE: While preheating is strongly
recommended for best results, you can
skip it by pressing the BAKE button
again. “Add Food” will flash across
the screen. Open the hood and place
ingredients in the crisper basket. Once
the hood is closed, cooking will begin
and the timer will start counting down.
NOTE: Convert traditional recipes by
reducing the temperature by 25°F. Check
food frequently to avoid overcooking.
NOTE: The TEMP iQ button and
temperature probe are not available for
use with the Dehydrate function.
NOTE: If you would like to use the
temperature probe to just check your
food, press TEMP iQ for 2 seconds and
the food’s internal temp will appear
on the screen for 5 seconds. If the
screen starts to blink, you didn’t hold
the button long enough. Refer to the
Troubleshooting section.
Loading ...
Loading ...
Loading ...