Loading ...
Loading ...
Loading ...
11
ninjakitchen.com
10
ninjakitchen.com
5 When the inside of your food reaches
the temperature you have set, the unit
will beep and the probe icon will blink.
The display will continue to show the
internal temperature of your food. You
can turn o the probe at any time by
pressing START/STOP. ALWAYS remove
food immediately once the desired
internal temperature is reached to
prevent overcooking.
6a Probe cooking complete: Remove
protein from the unit, keeping the
probe inserted, and place it on a plate
to rest for at least 5 minutes. The
protein will carry-over cook while it is
resting. When it reaches the carry-over
cook temperature in the chart on the
previous page, cooking is complete.
6b Cooking more food without the probe:
If you are cooking more food using the
same function, but do not need to use
the probe, simply press TEMP iQ and use
the TEMP down arrow to set the probe to
“OFF.” Then press the up TIME arrow
to set a new cook time. Adjust the
function temperature if needed. Press
START/STOP to begin. If you are cooking
more food using a dierent function,
select that function before setting the
new cook time and temperature.
6c Batch cooking with the probe: If you
are batch cooking more protein, remove
the probe from the cooked protein
and insert it in the center of the largest
piece of uncooked protein. Press the
TEMP iQ button, set the desired internal
temperature, and press START/STOP.
“Add Food” will display, let the unit run
for approximately 3 minutes before
opening the hood and adding the next
batch of protein. Then follow step 5.
3 Place the accessory required for your
selected cook function in the unit and
close the hood. Press START/STOP
to begin preheating. While the unit is
preheating, insert the probe horizontally
into the center of the thickest part of the
largest piece of protein, close to (but not
touching) the bone. DO NOT insert the
probe vertically or at an angle, as it will not
deliver an accurate reading. ALWAYS insert
it into the thickest piece of protein.
4 When the unit has preheated and
“Add Food” flashes on the screen, open
the hood, place food in the unit, and
close the hood over the probe cord. The
display will now show the temperature
probe reading as the food cooks.
USING THE NINJA® FOODI™ PRO GRILL – CONT.
4 Press START/STOP to begin
preheating.
PRE will appear on the display screen,
and the progress bar will begin. It can
take approximately 8 minutes to preheat.
5 When preheating is complete, the unit
will beep and “Add Food” will flash
across on the display screen.
6 Open the hood and place ingredients on
the grill grate. Once the hood is closed,
cooking will begin and the timer will
start counting down.
7 When cook time is complete, the unit will
beep and END will appear on the display
screen. If you need to add more time to
cook your food, press the TIME up arrow
and press START/STOP. Time adjustment
diers when using the probe. Reference
page10, step 6b when using the probe.
8 Keep the hood open after removing your
food so the unit will cool down more
quickly. The stainless steel wrap on the
exterior of the unit will be hot after cooking.
COOKING FUNCTIONS
Ensure the unit is plugged in before turning
it on. Press the power
button.
Grill
1 Place the cooking pot in the unit with
the indent on the pot aligned with
the rear bump on the main unit. Then
place the grill grate in the pot with the
handles facing up. Ensure the splatter
shield is in place and close the hood.
2 Press the GRILL button. The default
temperature level will illuminate on
the left side of the control panel and
the corresponding air temperature will
appear on the display screen. Press the
Grill button or the up and down TEMP
arrows to adjust the temperature setting.
3 Press the up and down TIME arrows
to set the cook time, in 1-minute
increments, up to 30 minutes, or follow
the instructions on page 9 to set a probe
temperature using TEMP iQ.
NOTE: If batch cooking, refer to the
bottom of page 8 for instructions.
NOTE: DO NOT touch the hot probe or
cord with bare hands during or just after
cooking. Always wear heat-resistant gloves.
Refer to Fig. 1
and Fig. 2 for
correct placement
of probe.
Fig. 2
Fig. 1
Refer to Fig. 3
for incorrect
placement
of probe.
Fig. 3
NOTE: You can check the internal
temperature of food at any time, even if a
cook function is not running. Simply press
the TEMP iQ button for 2 seconds.
NOTE: If you would like to use the
temperature probe just to check your
food, press TEMP iQ for 2 seconds and
the food’s internal temp will appear
on the screen for 5 seconds. If the
screen starts to blink, you didn’t hold
the button long enough. Refer to the
Troubleshooting section.
Loading ...
Loading ...
Loading ...