Loading ...
Loading ...
Loading ...
12 13
ninjakitchen.com
ninjakitchen.com
Air Crisp
1 Place cooking pot in the unit with
the indent on the pot aligned with
the bump on the main unit. Place the
crisper basket in the pot, then close
the hood.
2 Press the AIR CRISP button. The
default temperature setting will display.
Use the up and down TEMP arrows to
adjust the temperature.
3 Use the up and down TIME arrows
to set the cook time, in 1-minute
increments, up to 1 hour, or follow the
instructions on page 9 to set a probe
temperature using TEMP iQ.
4 Press START/STOP to begin preheating.
PRE will appear on the display screen, and
the progress bar will begin. It can take
up to 3 minutes to preheat.
4 Press START/STOP to begin preheating.
PRE will appear on the display screen,
and the progress bar will begin. It can
take up to 3–5 minutes to preheat.
5 When preheating is complete, the unit will
beep and “Add Food” will flash across on
the display screen.
6 Open the hood and place ingredients
in the pot. Once the hood is closed,
cooking will begin and the timer will
start counting down.
7 When cook time is complete, the unit
will beep and END will appear on the
display screen. Remove your food and
close the hood. If you need to add more
time to cook your food, simply press the
TIME up arrow and press START/STOP.
Roast
1 Place cooking pot and roasting rack
in the unit with the indent on the pot
aligned with the bump on the main unit,
then close the hood.
2 Press the ROAST button. The default
temperature setting will display. Use
the up and down TEMP arrows to
adjust the temperature.
3 Use the up and down TIME arrows to set
the cook time, in 15-minute increments,
up to 4 hours, or follow the instructions
on page 9 to set a probe temperature
using TEMP iQ.
5 When preheating is complete, the unit will
beep and “Add Food” will flash across on
the display screen.
6 Open the hood and place ingredients
in the crisper basket. Once the hood is
closed, cooking will begin and the timer
will start counting down.
7 For best results, we recommend
shaking ingredients frequently. When
you open the hood, the unit will pause.
Use silicone-tipped tongs or oven
mitts to shake the basket. When done,
replace the basket and close the
hood
.
Cooking will automatically resume after
hood
is closed.
8 When cook time is complete, the unit
will beep and END will appear on the
display screen. Remove your food and
close the hood. If you need to add more
time to cook your food, simply press the
TIME up arrow and press START/STOP.
GRILLCONTROL
NOTE: While preheating is strongly
recommended for best results, you can
skip it by pressing the AIR CRISP button
again. “Add Food” will flash across
the screen. Open the hood and place
ingredients in the crisper basket. Once
the hood is closed, cooking will begin
and the timer will start counting down.
NOTE: While preheating is strongly
recommended for best results, you can
skip it by pressing the ROAST button
again. “Add Food” will flash across
the screen. Open the hood and place
ingredients in the crisper basket. Once
the hood is closed, cooking will begin
and the timer will start counting down.
NOTE: Convert traditional recipes by
reducing the temperature by 25°F. Check
food frequentlyto avoid overcooking.
NOTE: If you would like to use the
temperature probe just to check your
food, press TEMP iQ for 2 seconds and
the food’s internal temp will appear
on the screen for 5 seconds. If the
screen starts to blink, you didn’t hold
the button long enough. Refer to the
Troubleshooting section.
NOTE: If you would like to use the
temperature probe just to check your
food, press TEMP iQ for 2 seconds and
the food’s internal temp will appear
on the screen for 5 seconds. If the
screen starts to blink, you didn’t hold
the button long enough. Refer to the
Troubleshooting section.
USING THE NINJA® FOODI™ PRO GRILL – CONT.
Loading ...
Loading ...
Loading ...