Loading ...
Loading ...
Loading ...
ENGLISH
7
DANGER: RISK OF ELECTRICAL SHOCK
WHAT CAN HAPPEN HOW TO PREVENT IT
• Spray directed at
electrical outlets or
switches, or objects
connected to an
electrical circuit,
could result in a fatal
electricalshock.
• Unplug any electrically
operated product before
attempting to clean
it. Direct spray away
from electric outlets
andswitches.
DANGER: RISK OF CHEMICAL BURN
WHAT CAN HAPPEN HOW TO PREVENT IT
• Use of acids, toxic or
corrosive chemicals,
poisons, insecticides,
or any kind of
flammable solvent
with this product
could result in serious
injury ordeath.
• Do not spray acids,
gasoline, kerosene, or any
other flammable materials
with this product. Use only
household detergents,
cleaners and degreasers
recommended for use with
pressurewashers.
• Wear protective clothing
to protect eyes and
skin from contact with
sprayedmaterials.
WARNING: RISK OF BURSTING
WHAT CAN HAPPEN HOW TO PREVENT IT
• Over inflation of
tires could result in
serious injury and
propertydamage.
• Use a tire pressure gauge
to check the tires pressure
before each use and while
inflating tires; see the tire
sidewall for the correct tire
pressure.
NOTE: Air tanks, compressors
and similar equipment used to
inflate tires can fill small tires
similar to these very rapidly.
Adjust pressure regulator on
air supply to no more than the
rating of the tire pressure. Add
air in small increments and
frequently use the tire gauge to
prevent overinflation.
• High-velocity fluid
spray directed
at pneumatic
tire sidewalls
(such as found
on automobiles,
trailers and the like)
could damage the
sidewall resulting in
seriousinjury.
• On pressure washers rated
above 1600psi (11032kPa)
use the widest fan spray
(40º nozzle) and keep
the spray a minimum of
8" (200 mm) from the
pneumatic tire sidewall. Do
not aim spray directly at
the joint between the tire
andrim.
WARNING: RISK OF HOT SURFACES
WHAT CAN HAPPEN HOW TO PREVENT IT
• Contact with hot
surfaces, such as
engines exhaust
components, could
result in seriousburn.
• During operation, touch
only the control surfaces
of the pressure washer.
Keep children away from
the pressure washer at
all times. They may not
be able to recognize the
hazards of thisproduct.
WARNING: RISK OF INJURY FROM LIFTING
WHAT CAN HAPPEN HOW TO PREVENT IT
• Serious injury
can result from
attempting to lift too
heavy anobject.
• The pressure washer is too
heavy to be lifted by one
person. Obtain assistance
from others beforelifting.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
INSTALLATION
Pressure Washer Assembly (Fig. A–F)
1. Slide the handle assembly
15
onto the frame
6
. Align
holes, insert saddle bolts
30
and secure in place with
knobs
31
. Tighten untilsnug.
CAUTION: Risk of personal injury. Avoid placing
hands between handle and frame when assembling
to preventpinching.
2. Align holes in the top handle
18
with the mounting
holes in the handle assembly
15
.
3. Insert saddle bolts
30
through aligned holes and secure
top handle to handle assembly with knobs
31
. Tighten
untilsnug.
Loading ...
Loading ...
Loading ...