1. Home
  2. Dewalt
  3. Dewalt DXPW3300S User Manual
  4. Page 16

Dewalt DXPW3300S 3300 PSI 2.4 GPM Gas Cold Water Pressure Washer

INSTRUCTION MANUAL - Page 16

For DXPW3300S.

PDF File Manual, 56 pages, Read Online | Download pdf file

DXPW3300S photo
Loading ...
Loading ...
Loading ...
ENGLISH
14
• Use reasonable care in the operation and maintenance
of the product as described in the Owners Manual(s).
Warranty Does Not Apply to Failures Due to:
• Freight damage
• Damage due to chemical deterioration, scale build up,
rust, corrosion or thermal expansion
• Freeze damage
• Damage caused by parts or accessories not obtained
from an authorized dealer or not approved by
themanufacturer.
• Normal wear of moving parts or components affected
by movingparts.
Engine and Emissions Control System
Covered by engine manufacturer warranty. See
enginemanual.
High Pressure Pump (defects in material and
workmanship)
AAA
TM
- Five (5) years from date of purchase
Frame (defects in material and workmanship)
Ten (10) years from date ofpurchase.
Accessories (Defects in Material and Workmanship)
Includes nozzles, hoses, spray guns, wands, tires, feet
Ninety (90) days from date ofpurchase.
Glossary
Bypass mode: Allows water to re-circulate within pump
when the gun trigger is notpulled.
Chemical hose: Feeds cleaning agents into the
pump to mix with the water. Refer to Chemicals and
CleaningSolvents.
Chemical injection system: Mixes cleaners or cleaning
solvents with water to improve cleaningeffectiveness.
Choke control: Opens and closes carburetor chokevalve.
CU: Cleaning Units. GPM multiplied by psi. (GPM x PSI = CU)
Fuel valve lever: Opens/closes connection between fuel
tank andcarburetor.
GPM*: Gallons Per Minute. The unit of measure for the flow
rate ofwater.
PSI*: Pounds per Square Inch. The unit of measure for water
pressure. Also used for air pressure, hydraulic pressure,etc.
* Complies with CETA Performance Standard CPC-100.
kPa (kilopascal): Metric pressure measurement. 1
kilopascal equal 1000pascals.
Quick-connect spray wand: Allows the user to quickly
change out high pressure nozzles. Refer to Spray
WandNozzles.
Thermal relief valve: When the temperature inside the
pump rises too high the valve will open and release a gush
of water in an effort to lower the temperature inside the
pump. The valve will thenclose.
Water supply: All pressure washers must have a source of
water. The minimum requirements for a water supply are 20
psi (138kPa) and 5gallons perminute.
Troubleshooting Guide
This section provides a list of the more frequently encountered malfunctions, their causes and corrective actions. The
operator or maintenance personnel can perform some corrective actions, and others may require the assistance of a
qualified FNA technician or yourdealer.
Problem Code
Engine will not start 1, 2, 3, 4, 5, 6, 7, 8, 36 (refer to the engine's instruction manual for further engine troubleshooting)
No or low pressure (initial use) 9, 10, 11, 12, 13, 14, 15, 16
Will not draw chemicals 16, 17, 18, 19, 20, 21
No or low pressure (after period of normal use) 22, 23, 24
Water leaking at gun/spray wand connection 25, 26
Water leaking at pump 25, 26, 27, 28
Oil leaking at pump 29, 30, 31, 32, 33, 34, 35
Pump Pulsates 12
Loading ...
Loading ...
Loading ...