Loading ...
Loading ...
Loading ...
Spark Arrester Service
Your engine is not factory-equipped with a spark arrester. In
some areas,it is illegal to operate an engine without a spark
arrester. Checklocal laws and regulations. A spark arrester is
availablefrom your nearest Sears service center. If you need
to order a spark arrester, please call 1-SOO-4-MY-HOME
(46g-4663).
The spark arrester must be serviced every 50 hours to keep it
functioning as designed.
If the engine has been running, the muffler will be very hot.
Allow the muffler to cool before servicing the spark arrester.
WARHIHG
_ ontact with muffler area can result in serious
burns.
f_ Exhaustheat/gases can ignite combustibles,structures or damage fuel tank causing a fire.
• DONOTtouch hot partsandAVOIDhot exhaustgases.
. Allowequipmentto cool beforetouching.
• Keepat least5feet (152cm) of clearanceonall sidesof
pressurewasherincludingoverhead.
. Codeof FederalRegulation(CFR)Title36 Parks,Forests,and
PublicPropertyrequireequipmentpoweredby an internal
combustionengineto haveasparkarrester,maintainedin
effectiveworkingorder,complyingto USDAForestservice
standard5100-1Corlater revision.Inthe Stateof Californiaa
sparkarresteris requiredundersection4442of the California
Publicresourcescode.Otherstatesmay havesimilar laws.
• Removespark arrester screenfor cleaningand inspection.
• Replaceif screen is damaged.
Air Cooling System
Overtime debris may accumulate in cylinder cooling fins and
cannot be observed without partial engine disassembly. For
this reason,we recommend you have a qualified Sears
service dealer clean the cooling system per recommended
intervals (see MaintenanceSchedule). Equally important is to
keeptop of engine free from debris. See CleanDebris.
Keepareas within heavyline clear of debris.
AFTEREACHUSE
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Follow these procedures after every
use:
1. Shut off engine, turn off water supply, point gun in a
safe direction, press red button and squeezetrigger to
relieve trapped pressure and let engine cool.
WARHIHG
The high pressurestream of water that this
equipment produces can cut through skin and its
_ nderlying tissues, leading to serious injury and
_ossibleamputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
. Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
• ALWAYSpointspraygunin safedirection,pressred button
andsqueezesprayguntriggerto releasehigh pressure,every
timeyoustop engine.
2. Disconnect hose from spray gun and high pressure
outlet on pump. Drain water from hose, gun, and spray
tip extension. Use a rag to wipe off the hose.
3. Empty pump of all pumped liquids by pulling recoil
handle about 6 times. This should remove most liquid in
pump.
4. Coil high pressure hose on hose wrap provided on
accessory tray.
5. Store unit in a clean, dry area.
6. If storing for more than 30 dayssee Long Term Storage
on next page.
WARHIHG
f_ Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severeburns or
death.
WHENSTORINGFUELOREQUIPMENTWITH FUELIN TANK
. Storeawayfromfurnaces,stoves,water heaters,clothes
dryers,or otherappliancesthathavepilot light or otherignition
sourcebecausetheycanignitefuelvapors.
Loading ...
Loading ...
Loading ...