Loading ...
Loading ...
Loading ...
Pressure Washer Rinsing
For Rinsing:
1. Remove black detergent spray tip from nozzleextension.
2. Selectand install desired high pressurespray tip
following instructions How to Use Spray Tips.
3. Keepspray gun a safe distance from area you plan to
spray.
WARHIHG
spray gun can cause you
Kickbackfrom to fall.
• Operatepressurewasherfrom astablesurface.
. Be extremelycarefulif youmust usethe pressurewasherfrom
a ladder,scaffolding,or anyothersimilarlocation.
. Firmlygraspspraygun with bothhandswhenusinghigh
pressuresprayto avoidinjury whenspraygun kicksback.
4. Apply a high pressure spray to a small area and then
check surface for damage. If no damageis found, you
can assume it is okay to continue rinsing.
5. Start at top of area to be rinsed, working down with
same overlapping strokes as you used for cleaning.
Cleaning Detergent Siphoning Tube
If you used the clear detergent siphoning tube, you must
flush it with clean water before stopping the engine.
1. Place detergent siphoning tube/filter in a bucket full of
clean water.
2. Remove high pressure spray tip from nozzleextension.
3. Selectand install black detergentspray tip following
instructions How to UseSpray Tips.
4. Flushfor 1-2 minutes.
5. Shut off engine following instructions How to Stop
Pressure Washerand turn off water supply.
6. ALWAYS point spray gun in a safe direction push red
button and squeezespray gun trigger to release retained
high water pressure.
iMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
WARHIHG
The high pressurestream of water that this
equipment produces can cut through skin and its
_ nderlying tissues, leading to serious injury and
)ossible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
• ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntrigger,to releasehighpressure,every
timeyoustop engine.
Automatic Cool Down System (Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach temperatures above
125°F. The system engagesto cool the pump by discharging
the warm water onto the ground.
15
Loading ...
Loading ...
Loading ...