User Manual - Page 23

For WDI490M.

Loading ...
Loading ...
Loading ...
23
ENG
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have a detrimental or
adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority
can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of the
water used. This is intended to optimize and customize the level of salt consumption.
Please follow the steps below for adjustment in salt consumption.
1. Switch on the appliance;
2. Press the Program button for more than 5 seconds to start the water softener set model within 60seconds after
the appliance was switched on;
3. Press the Program button to select the proper set according to your local environment, the sets will change in
the following sequence: H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the set up model.
WATER HARDNESS
Water softener
level
Regeneration
occurs every
X program
sequence
1)
Salt
consumption
(gram/cycle)
German
dH *
French
fH **
British
Clarke ***
Mmol/l
0 - 5 0 - 9 0 - 6 0 - 0.94 H1 No regeneration 0
6 - 11 10 - 20 7 - 14 1.0 - 2.0 H2 10 9
12 - 17 21 - 30 15 - 21 2.1 - 3.0 H3 5 12
18 - 22 31 - 40 22 - 28 3.1 - 4.0 H4 3 20
23 - 34 41 - 60 29 - 42 4.1 - 6.0 H5 2 30
35 - 55 61 - 98 43 - 69 6.1 - 9.8 H6 1 60
Alt
indicator
Upper
When you select Upper, only the dishes in the upper rack will be washed. The
spray system of the lower basket will not operate.
Lower
When you select Lower, only the dishes in the lower rack will be washed. The
spray system of the upper basket will not operate.
Function
indicator
Extra Cleaning
To wash very dirty, hard to clean dishes. ( It can only be used with Intensive,
Universal, ECO, Glass, 90 min )
Extra Drying
For better drying results. (It can only be used with Intensive, Universal, ECO, Glass,
90 min)
Warning
indicator
Rinse Aid
If the
indicator is lit, it means the dishwasher is low on dishwasher rinse aid
and requires a refill.
Salt
If the
indicator is lit, it means the dishwasher is low on dishwasher salt and
needs to be refilled.
Loading ...
Loading ...
Loading ...