Loading ...
Loading ...
Loading ...
43MAINTENANCE
ENGLISH
Cleaning the Filters
1Remove the lower rack and position the bottom
spray arm so a wider vee is open to the front.
2Turn the inner lter counter-clockwise and take
out the assembled inner lter and stainless steel
lter.
3Clean the lters with a soft brush under running
water. Reassemble the lters before reinstalling
them.
4To replace the assembled lters, position the
spray arm so the wider vee is toward the front.
Fit the lters back into the lter holder and
secure them by turning the inner lter clockwise
until it clicks into place.
WARNING
•Be cautious of sharp edges when handling the
stainless steel lter.
CAUTION
•Remove food residue caught in lters to prevent
the build up of odor-causing bacteria and
possible drainage problems.
NOTE
•For best wash performance, clean the lter after
each load. If food debris remains in the lter, it may
cause an odor.
•In areas with hard water, clean the lter at least
once a month with a soft brush.
•Clean the lters using non-abrasive materials and
warm running water.
•Make sure the lter is assembled correctly before
starting a cycle. When assembling, rotate it rmly
until it clicks.
Recommended Filter Cleaning Schedule
Number of
Loads Per Week
If you wash
dishes before
loading
If you scrape and
rinse dishes before
loading
If you only scrape
dishes before loading
If you do not scrape
or rinse dishes before
loading
1-3 Every 6 months Once a year Four times a year Once a month
4-7 Every 6 months Once a year Four times a year Twice a month
(every 15 days)
8-12 Every 6 months Every 6 months Every 1.5 months Every week
13-14 Every 6 months Every 6 mont Every 1.5 months Twice a week
Loading ...
Loading ...
Loading ...