Loading ...
Loading ...
Loading ...
9
15. INSTALL THE ADAPTER/DAMPER ON BACK OF POWER PACK
(HORIZONTAL DISCHARGE INSTALLATION ONLY)
HH0125A
BACK VIEW SIDE VIEW
WALL
From the outside of the wall, using 2 no. 8 x 3/8’’
screws provided in parts bag, secure the
adapter/damper to the back of the power pack.
Remove tape from damper flap. Connect ducting
to the adapter/damper and seal the joint using
metal foil duct tape.
16. REINSTALL INNER PANEL
Carefully put back in place the inner panel. Using a Phillips no. 2 screwdriver, and screws previously removed in step 8, secure the inner
panel to the power pack.
HO0132
SINGLE BLOWER UNIT DUAL BLOWER UNIT
SCREW LOCATIONS
SCREW LOCATIONS
CAUTION
Take care not to pinch wiring when installing inner panel.
17. PLUG THE BLOWER(S)
1. Plug back the blower(s).
2. Reinstall the blower plug cover in place, by aligning its tab with the slot in power pack panel.
3. Using a Phillips no. 2 screwdriver and the screw previously removed in step 7, secure the plug cover to the power pack.
HE0102
1
HO0130
3
HO0135
2
BLOWER
PLUG
COVER
Loading ...
Loading ...
Loading ...