Broan BC4130SS BC41 Series 30-inch Power Pack Insert Range Hood, 600 Max Blower CFM, Stainless Steel

INSTALLATION INSTRUCTIONS - Page 7

For BC4130SS. Series: BC41 Series
Also, The document are for others Broan models: BC2130SS

PDF File Manual, 12 pages, Read Online | Download pdf file

BC4130SS photo
Loading ...
Loading ...
Loading ...
7
10. REMOVE THE ELECTRICAL KNOCK-OUT
SINGLE BLOWER UNIT
Punch out the electrical knockout hole on back (A) OR on top (B),
to the right side of the power pack. Install the wire clamp (included
in parts bag).
D
UAL BLOWER UNIT
Punch out the electrical knockout hole on top (B) OR in front (C)
of the power pack.
11. REMOVE THE KNOCK-OUT OPENING
Remove the knockout opening on top
(vertical discharge installation) or on
back (horizontal discharge installation)
of the power pack.
1
2
HR0036
12. INSTALL THE ADAPTER/DAMPER
VERTICAL EXHAUST INSTALLATION
Using 2 no. 8 x 3/8’ screws provided in parts bag, secure the adapter to the top of the power pack. Remove tape from damper flap. Seal
the adapter to the power pack using metal foil duct tape.
HR0035
A
B
B
C
SINGLE BLOWER UNIT DUAL BLOWER UNIT
HO0136
HORIZONTAL EXHAUST INSTALLATION
The adapter/damper will be installed on the back of the power pack once the power pack is mounted in the custom hood. Refer to step 15.
Loading ...
Loading ...
Loading ...