Loading ...
Loading ...
Loading ...
6
6. REMOVE THE ADAPTER/DAMPER
Using a Phillips no. 2 screwdriver, remove both screws retaining the adapter/damper (A) to the
power pack inner panel. Set the adapter/damper aside.
NOTE: Though picture at right shows a double blower model, this applies also for single blower
model.
7. UNPLUG THE BLOWER(S)
Using a Phillips no. 2 screwdriver, remove the screw securing the blower plug cover in place.
Lift out the cover and set aside. Unplug the blower(s) from the inner panel.
8. REMOVE INNER PANEL
Using a Phillips no. 2 screwdriver, remove 4 screws retaining the inner panel to the power pack. See illustration below for screw locations.
Carefully detach the inner panel from the power pack and set aside with its screws.
HD0360
A
HE0102
HO0130
BLOWER
PLUG
COVER
HO0132
SINGLE BLOWER UNIT DUAL BLOWER UNIT
SCREW LOCATIONS
SCREW LOCATIONS
9. DISCARD THE DEFLECTOR (HORIZONTAL DISCHARGE INSTALLATION ONLY)
For horizontal dischage installation, disengage the deflector from the scroll notch, then lift out and discard the deflector.
HO0133
SINGLE BLOWER UNIT DUAL BLOWER UNIT
SCROLL NOTCH
SCROLL
NOTCH
Loading ...
Loading ...
Loading ...