Loading ...
Loading ...
Loading ...
Measuring Elapsed Time
1.
Use the operations below to measure
elapsed time.
A
A
A
A
Start
Stop
Resume
Stop
●
The stopwatch 1/20 (0.05)-second
hand will move for the first 30 seconds
after an elapsed time measurement
operation is started, and then stop.
When the elapsed time measurement
operation is stopped, the hand will
move to the appropriate position to
indicate the final 1/20 (0.05)-second
count.
2.
After you are finished with an elapsed time
measurement operation, press (B) to
reset the stopwatch.
3.
Press (C) three times to return to the
Timekeeping Mode.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper is muted in the cases described
below.
ー
When battery power is low
ー
When watch is at Level 2 power saving
l Power Saving Function
Getting Ready
Enter the Timer Mode.
l Navigating Between Modes
30
Setting the Timer Start Time
1.
Pull out the crown to the first click.
2.
Rotate the crown to change the
countdown start time setting.
●
The countdown start time can be set in
1-minute units up to 24 hours.
30
Seconds
Minutes
Hours
Crown
3.
Push the crown back in.
Note
●
When the small hour hand and small
minute hand are at 12 o’clock, a
countdown start time of 24 hours is
specified.
Using the Timer
1.
Press (A) to start the countdown.
30
A beeper will sound for 10 seconds to let
you know when the end of a countdown is
reached.
●
To pause an ongoing countdown, press
(A). To reset a paused countdown to the
start time, press (B).
2.
Press any button to stop the tone.
3.
Press (C) twice to return to the
Timekeeping Mode.
Alarms
The watch will beep when the alarm time is
reached.
●
The beeper is muted in the cases described
below.
ー
When battery power is low
ー
When watch is at Level 2 power saving
l Power Saving Function
Getting ready
Enter the Alarm Mode.
l Navigating Between Modes
30
Configuring Alarm Settings
1.
Pull out the crown to the first click.
This turns on the alarm.
2.
Rotate the crown to change the alarm time
setting.
30
Alarm on
Alarm hour/minute
Crown
3.
Push the crown back in.
4.
Press (C) once to return to the
Timekeeping Mode.
Note
●
A beeper will sound for 10 seconds
to let you know when the alarm time
is reached.
Operation Guide 5411
8
Loading ...
Loading ...
Loading ...