Loading ...
Loading ...
Loading ...
Summer Time
Summer time, which is also known as Daylight
Saving Time (DST), advances the time setting
one hour, 30 minutes, or some other amount
of time from standard time (STD) during the
summer months. Whether or not and how
summer time is used depends on your country
or local area. Summer time is not used in some
countries and local areas.
Adjusting the Time and Day
Setting
1.
Pull out the crown to the second click.
The second hand will move to the
currently selected time zone.
30
Hours
Minutes
Crown
Time zone
2.
Hold down (C) for about 10 seconds.
This causes the second hand to move to
12 o’clock and enables the hour and
minute setting operation.
3.
Rotate the crown to adjust the hour and
minute settings.
4.
Press (C).
This enables the year 10’s digit setting
operation.
80
90
30
40
20
50
70
10
60
00
＋
−
Year (10’ s digit)
5.
Rotate the crown to move the second
hand to the desired setting for the year
ten’s digit.
6.
Press (C).
This enables the year one’s digit setting
operation.
8
9
3
4
2
5
7
1
6
0
＋
−
Year (1’ s digit)
7.
Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
8.
Press (C).
This enables the month setting operation.
＋
−
8
9
10
4
2
5
7
11
1
6
12
3
Month
9.
Rotate the crown to change the month.
10.
Press (C).
This changes to the day setting operation.
30
＋
−
Day
11.
Rotate the crown to change the day.
12.
On a time signal at the top of a minute,
push the crown back in.
Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, adjust hand and day indicator
alignment.
●
The watch performs alignment of the hour
hand, minute hand, second hand, and 24-
hour hand automatically.
Adjusting Hand and Day
Indicator Alignment
1.
Pull out the crown to the second click.
2.
Hold down (B) for about five seconds, until
the second hand moves to 12 o’clock.
This will start auto alignment of the hour
hand, minute hand, second hand, and 24-
hour hand.
●
After auto alignment is complete, the
hands should be in the positions shown
below.
30
Second
hand
Minute hand
Hour hand
Crown
24-hour hand
●
If the 24-hour hand is off by 12 hours,
hold down (A) for about two seconds.
The 24-hour hand will move to 12
o’clock.
3.
Press (C).
Confirm that the small hour hand and
small minute hand are stopped at 12
o’clock.
30
Small hour
hand
Small minute
hand
4.
If the small hour hand and small minute
hand are not at 12 o’clock, rotate the
crown to align them correctly.
Operation Guide 5411
10
Loading ...
Loading ...
Loading ...