Basic Operations
This section provides an overview of the watch
and its operations.
Note
●
The illustrations included in this
manual have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
General Guide
30
③①②
⑤
④
⑥⑦⑧
⑨
A
Hour hand
B
Second hand
C
Minute hand
D
24-hour hand
E
Small minute hand
F
Small hour hand
G
Mode hand
H
Day indicator
I
Crown
Watch Face Items
①
②
③
④
⑤
⑥
⑦
⑨
⑧
⑩
⑪
⑫
⑬
A
Signal receive result
B
Alarm off
C
Alarm on
D
Time calibration reception in progress
E
GPS signal time information and position
information acquisition in progress
F
GPS signal time information reception in
progress
MA2109-EH
© 2014 CASIO COMPUTER CO., LTD.
G
Summer time setting
H
Approximate latitude
(N side: North latitude, S side: South
latitude)
I
Day of the week
J
Airplane Mode
K
Stopwatch Mode
L
Timer Mode
M
Alarm Mode
Navigating Between Modes
Your watch has four modes.
You tell which mode the watch is currently in
by checking the position of the mode hand.
●
Timekeeping Mode (normal timekeeping):
Current day of the week
●
Stopwatch Mode: ST (STW)
●
Timer Mode: TR
●
Alarm Mode: AL
CC
CC
Timekeeping Mode
30
30
30
30
Mode hand
Alarm Mode
Timer Mode
Stopwatch Mode
Use the (C) button to navigate between
modes.
●
Hold down (C) for at least two seconds to
return to the Timekeeping Mode.
●
Holding down (C) for four seconds or longer
will enter or exit the Airplane Mode. The
mode hand points to h while the watch is in
the Airplane Mode.
l Using the Watch on an Aircraft
Using the Crown
The watch’s crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Loosen
Crown
Important!
●
To prevent loss of water resistance
and/or damage due to impact, be
sure to push the crown in and lock it
when not in use.
●
When pushing the crown back in,
take care not to apply too much
force.
●
Fast Forward/Fast Reverse
Normal position
Second click
First click
Crown
After pulling out the crown to the first or second
click, rotating it quickly in succession in either
direction will start a fast forward or fast reverse
operation. While a fast forward operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
●
The fast reverse operation speed is fixed
and cannot be changed.
●
Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
●
If you do not perform any operation
for about two minutes after pulling
out the crown, crown operations will
automatically become disabled. If
that happens, push the crown back
in and then pull it out again.
Operation Guide 5411
1
Loading ...
Loading ...
Loading ...
