Loading ...
Loading ...
Loading ...
Network Configuration menu
Use this menu to establish network configuration settings.
NOTE: This menu appears on network models only.
Menu item Sub-menu item Description
TCP/IP Configuration Automatic
Manual
Select the Automatic option to automatically
configure all the TCP/IP settings.
Select the Manual option to manually configure the
IP address, subnet mask, and default gateway.
The default setting is Automatic.
Auto Crossover On
Off
This item is used when you are connecting the
product directly to a personal computer using an
Ethernet cable (you might have to set this to On or
Off depending on the computer being used).
The default setting is the On option.
Network Services IPv4
IPv6
This item is used by the network administrator to limit
the network services available on this product.
On
Off
The default setting for all items is On.
Show IP address No
Yes
No: The product IP address will not appear on the
control-panel display.
Yes: The product IP address will appear on the
control-panel display, alternating between supplies
information and the product IP address. The IP
address will not be displayed if an error condition
exits.
The default setting is No.
Link Speed Automatic (default)
10T Full
10T Half
100TX Full
100TX Half
Sets the link speed manually if needed.
After setting the link speed, the product automatically
restarts.
Restore Defaults Press the OK button to restore the network
configuration settings to the default values.
ENWW Control-panel menus 15
Loading ...
Loading ...
Loading ...