Loading ...
Loading ...
Loading ...
en Troubleshooting
30
Starting the descaling process
It takes around31minutes to descale your appliance.
ATTENTION!
Using non-recommended descaler may damage the
appliance
▶ Only use the descaler recommended by us for the
descaling programme. The length of time for which
the descaler is left to work is based on this product.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
▶ Remove descaling solution immediately with water.
1.
Use the function selector to select
.
a The display shows the duration of the descaling pro-
gramme. You cannot change the duration.
2.
Open the tank cover.
3.
Remove the drip tray and empty it.
4.
Slide the empty drip tray in fully.
5.
Remove the water tank.
6.
Mix water with descaler to make a descaling solu-
tion.
‒ Mix 250ml water with 50ml liquid descaler to
make a descaling solution, or dissolve a descal-
ing tablet, weight 18g, in 250ml water for
5minutes.
7.
Pour the descaling solution into the water tank and
slide the water tank in fully.
8.
Close the tank cover.
9.
Press
a The appliance is descaled.
a The remaining time counts down on the display.
a Once the descaling programme has run through to
the end, an audible signal sounds. The appliance
pauses.
10.
Open the tank cover.
11.
Remove the drip tray, empty it and slide it in.
12.
Remove the water tank, rinse it thoroughly, fill it with
fresh water and slide it in.
13.
Close the tank cover.
14.
Press
a The appliance is rinsed automatically twice. Once
the rinse cycle has run through to the end, an aud-
ible signal sounds.
Note:Observe the mixing ratio for the descaler.
Liquid descaler (order number 00311680): Mixing ratio
of 1:5, mix 50ml descaler with 250ml water.
Descaling tablets (order number 00311976): Dissolve
one descaling tablet, weight 36g, in 500ml water for
5minutes.
17.2 Rinsing
If you have not used the steam function for a long time,
descale and rinse the appliance.
To ensure that your appliance stays clean, you can
pump water through the pipe system. The appliance
then drains the water into the drip tray.
Note:After running the rinse cycle, loosened limescale
particles may be in the drip tray. This is normal and
does not affect operation.
Running the rinse cycle
1.
Use the function selector to select
.
a The display shows the programme duration. You
cannot change the programme duration.
2.
Open the tank cover.
3.
Remove the drip tray and empty it.
4.
Slide the empty drip tray in fully.
5.
Remove and empty the water tank and drain any re-
sidual water.
6.
Rinse out the water tank thoroughly and fill it with
fresh water.
7.
Slide the water tank in fully.
8.
Close the tank cover.
9.
Press
.
a Water is pumped through the pipes.
a The time remaining counts down in the display.
a An audible signal sounds once this time has
elapsed.
18 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ Only use genuine spare parts when repairing the
appliance.
▶ If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
18.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
Loading ...
Loading ...
Loading ...