Loading ...
Loading ...
Loading ...
Traction/Auger
Control Lock.-------.=
Discharge Chute
Chute
Clean-out Tool
Auger
Shift Lever
Auger Control
f
\
Chute DirectionalControl
_.=_Spark Plug
Choke _ ,_ _,
_ _ Prirner
_'_ _b/f !_SF_'<_ RscloilStarter
_l_ _ ,F._'_J Handle
,gnltion I
Throttle Control Open -_D.
I Fuel Shut_Off Valve I
Figure 11
ChuteClean-outTool
WARNING: Never use your hand to clear a
clogged discharge chute. Shut off engine and
remain behind handles until all moving parts
have stopped before unclogging.
The chute clean-out tool (see Figure 11) isdesigned to
clear a clogged discharge chute. Refer to OperatingYour
SnowThroweron page 12 for detailed instructions on how
toproperly use the chute clean-out tool.
IgnitionKey
The ignition key must be inserted in the switch in order
for the engine to start. Remove the ignition key when
the snow thrower is net in use.
NOTE: Do NOT "turn" the ignition key in an attempt to
start the engine. Doing so may cause it to break.
FuelShut-0ffValve(optional equipment)
On models so equipped, the fuel shut-off valve, located
under fuel tank, controls fuel-flow from the gas tank.
See Figure 11.
ThrottleControl
The throttle control is located on the engine. It regulates
the speed of the engine. See Figure 11.
SECTION4: OPERATINGYOURSNOWTHROWER
BeforeStarting
_b WARNING: Read, understand, and follow
all instructions and warnings on the machine
and in this manual before operating.
• The spark plug wire was disconnected for safety.
Attach spark plug wire to spark plug before starting.
GasAnd0il Fill-up
• At the factory, a plastic cup is inserted inside the
fuel tank's fill opening (beneath the fuel cap) to
prevent debris from entering the fuel tank during
assembly. Remove and discard this cup before
filling up the tank.
i_ WARNING: Use extreme care when
handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
Never fuel machine indoor or while the
engine is hot or running. Extinguish
cigarettes, cigars, pipes and other sources of
ignition.
StartingEngine
IMPORTANT: Prior to operating your snow
thrower, read, understand and follow ALL
instructions to perform adjustments found
under the heading AugerControlTeston
page 12 of this manual.
10
Loading ...
Loading ...
Loading ...