Loading ...
Loading ...
Loading ...
Settin
Self-Clean Cycle
Setting self-clean
The SELF CLEAN pad controls the Self-Cleaning
feature. When used with a the Delay Start pad,
a delayed Self-Cleaning cycle may also be
programmed. The Self Clean feature allows for any
Self=Cleaning cycle time from 2 (2:00) to 4 hours
(4:00). You may also choose the clean time in 1
minute increments (for example 2 hours and 50
minutes) by pressing the corresponding number
keypads.
If you are planning to use the oven directly after
a self=clean cycle remember to allow time for the
oven to cool down and the oven door to unlock.
This normally takes about one hour. So a 3 hour
self-clean cycle will actually take about 4 hours to
complete.
*It is recommend to use a 2 hour self=clean cycle
for light soils, a 3 hour cycle for average soils,
and a 4 hour cycle for heavy soils (to assure
satisfactory results).
See example below to start an immediate Self-
Cleaning cycle or to set a Delay Start time of
8:00 o'clock and shut-off automatically (example
provided is a default 3 hour Self-Clean cycle)
1. Be sure the clock is set with the correct time
of day, the oven is EMPTY and the oven door
is closed.
2. Press SELF CLEAN self
dean
The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). Note: If a
2 or 4 hour clean time is desired, press 2 0 0 for 2
hour or press 4 0 0 for a 4 hour clean time. Set the
cleaning time based on the amount of soil: light,
medium or heavy (*See above).
Note: If the optional delay Self-Clean feature is
needed, finish steps 3-4.
3. Press DELAY START delay
start
, Enter the desired Self-Clean
starting time using the number
pads 8 0 0.
5. Press START
800
4>
_:_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
When the Self-Clean Cycle is Completed
Once the oven has cooled down for approximately 1
HOUR, and the "DOOR LOCKED" icon is no longer
displayed, the oven door can then be opened.
Loading ...
Loading ...
Loading ...