Loading ...
Loading ...
Loading ...
02 Connecting the MICRO LED to
the One Connect Box
1-1 1-2
2
4
3
4
1
2
3
4 inches (10 cm)
MICRO LED
One Connect Box
Refer to the picture and connect the MICRO LED and One Connect
Box with the One Connect cable provided as a component.
• Do not use the One Connect Box in the upside-
down or upright position.
• Make sure that the cable is not twisted during
connection. Otherwise, the product performance
may be degraded or the cable may be damaged.
• When arranging the remaining cable, refer to the
picture above to arrange it.
Bending Twisting Pulling Pressing on
03 Initial Setup
When you turn on your MICRO LED for the first time, it
immediately starts the Initial Setup. Follow the instructions
displayed on the screen and configure the MICRO LED's basic
settings to suit your viewing environment.
Using the MICRO LED Controller
You can turn on the MICRO LED with the MICRO LED Controller
button at the bottom of the MICRO LED, and then use the
Control menu. The Control menu appears when the MICRO LED
Controller button is pressed while the MICRO LED is On.
Control menu
MICRO LED Controller button / Remote control sensor
Setting the sound sensor
You can turn on or off the sound sensor by
using its switch at the bottom of the MICRO
LED.
With the MICRO LED on, you can push the
switch to the left to turn on the sound sensor
or to the right to turn off it.
See the pop-up window on the MICRO LED to check whether the
sound sensor is turned on or off.
• The position and shape of the sound sensor may differ
depending on the model.
• During analysis using data from the sound sensor, the data is
not saved.
English - 6
Loading ...
Loading ...
Loading ...