Loading ...
Loading ...
Loading ...
7.3 Information and warning messages
The information messages in the table below are shown in the display of the product. Speak to your Husqvarna
representative if the same message shows frequently.
Message Cause Action
Limited cutting height
The cutting height adjustment cannot move. Examine the cutting height adjustment and
remove grass or other objects. If the problem
stays, speak to your approved servicing deal-
er.
Unexpected cutting
height adj
Limited cutting height
range
Cutting height prob-
lem
Cutting height
blocked
GPS navigation prob-
lem
Problem with the GPS assisted navigation
equipment.
Speak to your local Husqvarna representa-
tive if this message appears often.
Weak GPS signal
The sky is blocked in large parts of the work
area.
Remove objects that can cause a blockage
of the GPS signal.
Disable the GPS navigation function and use
the
Lawn coverage
function. Refer to
GPS
Assisted Navigation, Lawn Coverage and
Systematic Passage Mowing on page 25
.
Settings restored
A
Reset all user settings
has been done. Usual operation of the product.
Guide 1 not found
The guide wire is not connected to the charg-
ing station.
Connect the guide wire to the charging sta-
tion. Refer to
To install the guide wire on
page 18
.
Damage in the guide wire. Replace the damaged section with new
guide wire.
The guide wire is not connected to the boun-
dary loop.
Connect the guide wire correctly to the boun-
dary loop. Refer to
To install the boundary
wire on page 18
.
Connection changed
New loop signal changed. Usual operation of the product.
Difficult finding home
The product has been following the boundary
wire several laps without finding the charging
station.
The installation has not been done correctly.
Refer to
To install the boundary wire on page
18
.
Wrong corridor width setting on boundary
wire. Refer to
To install the boundary wire on
page 18
.
The product was started on a Secondary
area with the Main area setting.
Needs manual charg-
ing
The product is set to the
Secondary area
op-
erating mode.
Put the product in the charging station.
1650 - 006 - 20.02.2023 Troubleshooting - 41
Loading ...
Loading ...
Loading ...