Loading ...
Loading ...
Loading ...
EN-9
To wire through wall:
Mark a line distance (A) from the right of the
centerline on the underside of the wall. Mark the point
on this line that is from the underside of
the cabinet. Drill a 1¼” (3.2 cm) diameter hole (B)
through the rear wall at this point.
1.
A
Centerline
from wall,
not cabinet frame
B
A
A Centerline
B
PREPARE THE LOCATION
To wire through top:
Mark a line distance (A) from the right of the
centerline on the underside of the cabinet. Mark the
point on this line that is 1 1/2"(3.8cm) from back wall.
Drill a 1¼” (3.2 cm) diameter hole (B) through the
cabinet at this point.
2.
1 1/2"(3.8cm)
1 1/2"(3.8cm)
1 1/2"(3.8cm)
Determine Wiring Hole Location
Determine and clearly mark a vertical centerline on
the wall and cabinet bottom.
1.
A
A Centerline
hood
model
30” & 36”
models
Dim
A
8 5/8”
(21.9 cm)
hood
model
Dim
A
30” & 36”
models
8 5⁄8
”
(21.9 cm)
Roof Venting
To make a 4 ” x 10½” (10.8 cm x 26.7 cm) rectangular
cutout on the underside of cabinet top and bottom:
Mark lines (1.6 cm) and 4 ” (10.8 cm) from the
back wall on the centerline of the underside of cabinet.
Mark lines 5¼” (13.3 cm) to the right and left of the
centerline on the underside of cabinet.
Use saber or keyhole saw to cut a rectangular opening
for vent.
Repeat steps 1-3 for the underside of the top of the
cabinet.
1.
2.
3.
4.
Cabinet cutouts
*From wall, not cabinet frame
*
5 /
1
4
(13.3 cm)
5
1
/4
(13.3 cm)
(10.8 cm)
Centerline
Wall Venting
To make a 4 ” x 10½” (10.8 cm x 26.7 cm) rectangle in
the wall:
Make 2 lines by measuring ”
(10.16 cm) down from underside of cabinet and mark on
the centerline on the back wall.
Mark lines 5¼” (13.3 cm) to the right and left of the
centerline on the wall.
Use saber or keyhole saw to cut a rectangular opening
in the wall for the vent.
1.
2.
3.
Cabinet
front
Centerline
5
1
/4”
(13.3 cm)
”
(10.16 cm)
⁄ ”
5
1
/4”
(13.3 cm)
"
"
"
¼”
(0.63 cm) and
(0.63 cm)
4
1
5
/8 (1.6 cm)
4
4
¼
¼
5
8
1
4 4/
¼
Loading ...
Loading ...
Loading ...