Loading ...
Loading ...
Loading ...
15weber.com
m WARNING: Open lid during ignition.
m WARNING: Do not lean over open barbecue while
igniting or cooking.
m WARNING: If ignition does not occur within five
seconds, turn the burner control knob to the o
position. Wait five minutes to allow accumulated
gas to dissipate, and then repeat the lighting
procedure.
Igniting the Barbecue
Using the Ignition System to Ignite the
Barbecue
The ignition system ignites the burner with a spark from
the igniter electrode. You generate the energy for the
spark by pushing the igniter button. You will hear the
igniter ticking. After preheating on high is complete,
you may adjust the burner control knob to your desired
setting for barbecuing.
1) Open the barbecue lid (A).
2) Check that the burner control knob is in the o
position. Check by pushing in and turning knob
clockwise (B).
3) Confirm that the cartridge/cylinder is properly
installed and gas is on. Refer to “Installing the
Propane Cartridge/Cylinder Installation."
4) Push the burner control knob in and turn it
counterclockwise to the start/high
position (C).
5) Push the red igniter button several times, so it clicks
each time (D).
6) Check that the burner is lit by looking through the
cooking grills. You should see a flame.
7) If the burner does not ignite, turn burner control
knob to the o
position and wait five minutes to
allow the gas to clear before attempting to light the
burner again.
Should the burner fail to ignite using the ignition
system, refer to the TROUBLESHOOTING section.
Thereyou will find instructions on igniting the barbecue
with a match to help determine the exact problem.
To Extinguish Burners
1) Push the burner control knob in and then turn
clockwise all the way to the o position.
A
OPERATION
B
C
D
Loading ...
Loading ...
Loading ...