BOSS GX-100 User Manual

Loading ...

Looper

You can record a performance and play back the recorded section over and over (mono: up to 38 seconds, stereo: up to 19

seconds). You can also layer additional performances (overdubbing) with the recording as it plays back.

This lets you create real-time backing performances on the fly.

You must place the looper somewhere in the effect chain in order to use it.

Also, you need to assign the looper’s record, play, and overdub functions to the switches you want. Here’s an example of how you

can use the [C1] switch on this unit or an external footswitch connected to CTL 3, 4/EXP jack on this unit to operate the looper.

Placing the looper in the effect chain

Select the memory with which you want to use the looper.

Follow the steps in “3.2. Effect Placement(P.26)” to place the looper in the effect chain.

Assigning Looper Functions to Switches

Follow the steps in “8.1. Assigning a Function(P.49)” to display the CONTROL FUNCTION screen.

For “CTL 1,” ”CTL 3,” and ”CTL 4,” set FUNCTION as follows.

Parameter

Value

Explanation

CTL 1

LOOPER

CTL

Starts recording. Each time you press the switch, operation alternates between playback and

overdubbing. Press twice to stop playback. Long-press to erase the recording.

Loading ...

BOSS GX-100 Guitar Effects Processor