Loading ...
Loading ...
Loading ...
Connecting with an External MIDI Device
43
Connecting with an External MIDI Device
On the GX-100, you can use MIDI to perform the following operations.
* For details on MIDI, refer to “GX-100Parameter Guide.”
Operations from the GX-100
Operation
Explanation
Transmit program
change messages
When you select a memory on the GX-100, the program change message specified by MEMORY MIDI is
also transmitted. The external MIDI device that receives this program change message will switch to the
corresponding settings.
Transmit control
change messages
When you operate the [C1]–[C2] switches or the footswitches or expression pedals connected to the CTL
3, 4/EXP 2 jack, this is output as a control change message. These messages can control parameters on an
external MIDI device.
Operations from an External MIDI Device
Operation
Explanation
Switch memory numbers
When the GX-100 receives a program change message from an external MIDI device, the GX-
100 will change memories.
Receiving Control Change
messages
The GX-100 can receive control change messages to control a specified parameter while you
perform.
Receive data
The GX-100 can receive data that is transmitted from another GX-100 unit, or data that was
saved on a MIDI sequencer.
Connection example
Settings
1.
Following the steps in “4.1. Basic MENU Operations(P.35),” select the sub-menu item in [MENU] Ó <MIDI>
Ó .
2.
If you’ve selected “MIDI SETTINGS” in the sub-menu, drag the parameter icon up/down to change the
value.
If you’ve selected “PROGRAM MAP” in the sub-menu, use knobs [1]–[4] to change the values.
Loading ...
Loading ...
Loading ...