Loading ...
Loading ...
Getting Ready
3
Getting Ready
This chapter explains how to get ready to play with the GX-100, including connecting the devices, the instruments to use, how to
make the basic settings suitable for your amp and so on.
Connecting the Equipment
Name of jack, port or
connector
Explanation
INPUT
Connect your guitar here.
OUTPUT L/MONO, R
Connect these to your guitar amp or mixer. If using a mono connection, use only the L/MONO jack.
PHONES
Connect your headphones here.
SEND/RETURN
Connect an external effect processor here.
You can connect an external effects processor between the SEND jack and RETURN jack, and use it as
one of the GX-100’s effects processors.
The sound that is input to SEND/RETURN within the effect chain will be output to the SEND jack. The
sound that is input via the RETURN jack will be input to SEND/RETURN within the effect chain.
[GND LIFT] switch
This should normally be set to OFF. Noise may occur due to a ground loop when you connect an
amp to the EXT LOOP (SEND/RETURN) jack. The noise may be eliminated if you switch to LIFT.
AMP CTL 1, 2
By connecting this to the channel switching jack of your guitar amp, you can switch channels from the
GX-100.
CTL3, 4/EXP2
You can control various parameters by connecting an expression pedal (Roland EV-5: sold separately) or
a footswitch (FS-5U, FS-6, FS-7: sold separately).
* Use only the specified expression pedal. Connecting expression pedals made by third-party
manufacturers may cause this unit to malfunction.
Loading ...
Loading ...
Loading ...