Loading ...
Loading ...
Loading ...
Editing: Effects
31
Deleting
1.
Press the [EFFECTS] button to activate the chain.
2.
Use the [SELECT] knob to select the effect you want to delete.
3.
Hold down the [EXIT] button and press the [SELECT] knob.
The effect you selected in the chain is now deleted.
Switching Tones Without Interrupting the Sound
Using DIVIDER and MIXER within the same memory
Place the same type of effect in parallel and use DIVIDER to switch between channels A and B.
Example:
Switching from a clean sound that uses chorus and heavy delay to a high-gain, crunchy sound that uses a phaser and light delay.
The settings of the effect used before switching are placed in parallel with the settings used after switching.
Preserving the Tail of the Effect (Delay, Reverb, etc.) when the Effect is Switched Off (Carryover)
The function that preserves the tail of an effect (such as delay or reverb) even after the effect is switched off is called “carryover.”
Enabling carryover when switching memories
To enable the carryover of the delay or reverb (included in the memory that you used before switching) after you’ve switched to a
different memory, make the following settings.
● On the preceding and on the following memories, configure the effect chain to use the same effect, and use the same
arrangement. Set each effect type to be the same as well.
● On each memory, change the effect parameter settings and the on/off settings.
● Turn the CARRYOVER parameter in MASTER of the final component in the effect chain to “on.”
or
Loading ...
Loading ...
Loading ...