Loading ...
Loading ...
Loading ...
21
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
E06/E07: Motor Abnormality
The motor wire is not
connected, or the motor is
damaged.
Check motor wires to see if the
motor is connected. If the wire
has been punctured or damaged,
you will need to replace it. If the
problem is not rectified, you may
need to replace the motor.
E08:Control Board Abnormality
The control board is not
connected.
Check the upper and middle
wires to see if the control board
is connected. If the wire has
been punctured or damaged, you
will need to replace it. If the
problem is not rectified, you may
need to replace the control
board.
E09/E10: Motor Abnormality
The motor is damaged, or
a moving part of the
treadmill is stuck and
therefore the motor is
unable to rotate properly.
Inspect moving parts of the
treadmill to ensure that they are
operating correctly.
Replace the motor if necessary.
E11/E12: Message failure
Wires from the console
and bottom control board
are not properly
connected.
Check wire connections from the
console to the control board. If
the wire has been punctured or
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the control board.
Loading ...
Loading ...
Loading ...