Loading ...
Loading ...
Loading ...
15
WINDOW DISPLAY:
SPEED/ PULSE: The speed range is 0.6-9 MPH. 0.6MPH is the default running speed.
When the runner holds both hands on the pulse sensors (located on the handles), the system will
calculate the runner’s heartbeat and display it in this window. The pulse range is 50-200 beats/min.
NOTE: This data is just for reference and cannot be used for medical purposes.
TIME: Displays the time elapsed (0:00-99:59 MINS). If the time reaches 99:59, the treadmill will stop
smoothly and display “End” then automatically reset to 0:00 after 5 seconds.
When in Countdown Mode, it will count from the setting time to 0:00. When the clock reaches 0:00, the
treadmill will stop smoothly and display “End” then automatically reset itself after 5 seconds. Maximum
Countdown time is 99:00 minutes.
CALORIES/ DISTANCE: Displays the number of calories burned from 0 to 999 KCAL and the
distance traveled (0.0-99.9 MILE). When the count reaches 999 KCAL, it will reset and start back from
0. When in Countdown Mode, it will count down from the desired setting to 0. Once it reaches 0, the
treadmill will stop smoothly and display “End”, then automatically reset to the initial setting after 5
seconds. When the distance reaches 99.9 MILE, it will reset to 0.00 and begin counting again from 0.0.
When in Countdown Mode, it will count down from the setting data to 0.00. When it reaches 0.00, the
treadmill will stop smoothly and display “End” and automatically reset to the initial setting after 5
seconds.
When setting PROGRAMS, the speed is programmed in intervals; PROGRAMS are from
P01-P02-P03-…P14-P15-U1-U2-U3-FAT.
FUNCTION KEYS:
PROGRAM: Press the PROGRAM button to set your desired interval setting. Programs are displayed
as P01-P02-P03-
…
P14-P15-U1-U2-U3-FAT. and the various intervals are shown on the face of the
treadmill. P1-P15 are preset programs.
MODE: When stopped, press this button to select a Countdown mode.
15:00 MINS is the set Countdown for TIME.
1.0 Mile is the set Countdown for DISTANCE.
50 KCAL is the set Countdown for CALORIES.
When setting each Countdown Mode, you can press the speed +/– buttons to increase or decrease
from the set data. Press START to start the treadmill.
START: To start the treadmill, insert the pin end of the Safety Key (No. C24) into the Console (No.
D01) and then press the START button. This treadmill requires the Safety Key (No. C24) in order to
start. 0.6 MPH is the default start speed.
STOP: This button has functions of PAUSE and STOP. When in use, press this button once to PAUSE
your workout and the current workout data will still be shown. Press STOP again to terminate your
workout session completely and all data will be deleted and reset to the initial setting.
SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of 0.1
MPH. Pressing and holding either of these buttons for a duration of over ½ of a second will increase or
decrease the speed continually.
PROGRAMS
Initial
Default Value
Set Range
Display Range
TIME (MIN:SECOND)
0:00
15:00
5:00-99:00
0:00－99:59
SPEED (MPH)
0.0
0.6
0.6-9.0
0.6-9.0
DISTANCE (MILE)
0.00
1.00
0.50-99.9
0.00-99.9
PULSE (BPM)
P
N/A
N/A
50-200
CALORIE (KCAL)
0
50
10-999
0－999
Loading ...
Loading ...
Loading ...