Loading ...
Loading ...
Loading ...
MONTE MONTHLY GOAL
WEEK # DIS TANCE CALORIE$ TIME
MONTHLY TOTALS:
MONTH MONTHLY GOAL
WEEK# DIS TANCE CALORIE$ TIME
MONTHLY TOTALS:
MONTH MONTHLY GOAL
WEEK # DIS TANCE CALORIE$ TIME
MONTHLY TOTALS:
_'_
I SXE7.7 Rev.l.6Jndd 26-27
YourHorizonFitness elliptical is designed to be reliable. However,if you do experienceproblems with your
elliptical, pleasereferencethe troubleshootingguide listed below.
PROBLEM: Theconsoledoes not turn on,
SOLUTIOH: Verifythe foflowing:
• Theoutlet the machine is plugged into is functional Doublecheck that the housebreakerhas not tripped.
• Thecorrect adapter is being used. Onlyusean adapter intended for HorizonFitness Ellipticals,
• Theadapter is not pinched or damaged and is properlyplugged into the outlet ANDthe machine,
• Thepower switch is turned to the ONposition (maynot apply to aft models),
• Turnoff the machine and unplug power cord. Removethe consoleand check that aft connections to the console
are secureand not damaged or pinched.
NOTE:If your consoleuses batteries, they may need to be replaced.
PROBLEM:Theconsoleturns onbut the fime/RPM'sdo not count.
SOLUTION: Verifythe foflowinf:
• Turnoff machine and unplug power cord. Removethe consoleand check that all connections to the console are
secureand not damaged or pinched.
If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or
damaged.
PROBLEM: Theresistance levelsseem to be incorrect, seemingtoo hard or too eas_
SOLUTION: Verifythe foflowing:
• Thecorrect adapter is being used. Onlyusean adapter intended for HorizonFitness Ellipticals,
• Reset the consoleand aflow the resistance to reset to the default position, Restart and retry the resistance levels,
PROBLEM:Theroller wheelsappear to be leaving particles on the guide rails,
S_T_,,: Thisis considerednormal wear of the elliptical wheels,
Toremove,simply wipe off the roller wheelsand guide rails with a damp cloth,
PROBLEM:Theelliptical makes a squeaking or chirping noise,
SOL UTIOR: Verifythe following:
Theelliptical is on a level surface,
• Loosenall bolts attached during the assembly process,grease the threads, and tighten again,
_,r,
!iii i
8/16/07 11:02:00 AM I
Loading ...
Loading ...
Loading ...