Loading ...
Loading ...
Loading ...
4
1. TECHNICAL DATA
1.1 AIR DISTRIBUTION (NORMAL OPERATION)
VF0079
NOTE: The dimensions, performance charts, defrost cycle tables and specifi cations are listed on the specifi cation sheets
of the unit.
Visit our website at www.venmar.ca.
2. INSTALLATION
The wearing of safety glasses and gloves is recommended when installing, maintaining or cleaning the unit to
reduce the risk of injury that could be caused by the presence of thin metal and/or high moving parts.
WARNING
!
Stale air
from
building
Fresh air
from
outdoors
Fresh air to
building
Stale air
to
outdoors
Consumer Information
A. To ensure quiet operation of the H/ERV, each product model must be installed using sound attenuation techniques
appropriate for the installation.
B. The way your heat/energy-recovery ventilator is installed can make a signifi cant difference to the electrical energy you
use. To minimize the electricity use of the heat/energy-recovery ventilator, a stand-alone fully ducted installation is re-
commended. If you choose to connect the H/ERV to the ducting of your furnace air handler for room-to-room ventilation,
an electrically effi cient furnace that has a variable speed blower motor will minimize your electrical energy consumption
and operating cost.
Make sure that no piece of mineral wool will enter in the unit during installation. Otherwise, this could reduce
airfl ow and generate vibrations and noise in the unit.
CAUTION
2.1 INSPECT THE CONTENT OF THE BOX
NOTE: Before proceeding to the installation, check the content of the box. If items are missing or damaged, contact the
manufacturer. Remove all packaging material from the unit.
• Inspect the exterior of the unit for shipping damage. Ensure that there is no damage to the door, door latches, ports,
power cord, etc.
• Unlatch, open (A) and remove (B) the unit door.
VD0524
A
A
B
Loading ...
Loading ...
Loading ...